Solo 665 vs Mastermind MS 362C-M

Reckon I should add a little oil to the fuel in my tractor?

 

If its a new one there designed to run without the sulpher bit some won't hurt. An older one I would do it. I read folks run it anywhere from 250-350:1 of tcw3 2 stroke. I use super tech. Or whatever I have for the boat. Oil won't hurt a new one either.

 

I dump partial qts of trans fluid or old two stroke oil I have had at the farm in mine. But something tells me that the fuel here in america is nothing g like the fuel that my 30+ year old yanmar was designed to run on in japan

 

My tractor is a Massey 135 with a Perkins diesel......

 

Those are good tractors from what I hear!!

Yea id dump some in. Just get the walmart supertec in gallon jugs. Its probably only up to like $13 these days. I use to buy it for like $9 back when I uses my boat lots

 

Glad to see threads don't get derailed on this site. LoL

 

I put power service in mine too , to quiet the diesel knock in the 2 cyl down. It says it lines too but on a list I saw of lubricity it was like #7. Super tech tcw3 was in the top three for lubricity additives from some report done by either a diesel mag or website that I read. The list circles the internet.

 

Hey its a forum isnt it!!

 

Yes.

My newest tractor wont run worth a flip if I don't keep the injectors lubed well. The older ones I can run with a little less oil.

 

As much as I like a good diesel thread...I'll redirect.

Here's my take on this. Mastermind doesn't have a bag of PFM (pure f'n magic) that he pulls out and sprinkles on these saws. He can only help them do what they were designed to do better. Doesn't matter if the carb is mtronic or not. Fuel is fuel...Air is air....flow is flow....compression is compression. You can only pick up what was left on the table. The saw has 9% more displacement and not much was left on the table.

 

Well said.

 

Gimme torque. Lots of it. I'll leave the pizz revvin' and cant racing to others...

 

Haha

 

I second both of these.

 

Where in the heck can u look at a solo chainsaw??!!!. I cant even pull pictures of the saws up on their website??!!!!

 

KRL said they no longer sell them in the US so thats probably why. But google should be full of pics?

 

Why buy a saw u cant even look at on their website or order parts?

 

Cause the thing is a beast and out cut a masterminded 362!!!.

Some parts from dolkitas will swap I bet. And I am sure that you can her parts if need be they still sell them in europe???

Also KRL had them at his house so he could of posted pics if someone wanted to see it???

 

Heck no! Go for it. I wouldnt have a saw I couldnt call and get a part from a local dealer or punch in on ebay or somewhere and get parts?? Hell I was interested but not when u cant pull up their website and look at different models? Saw is impressive but not for me when u cant even find one on the internet?