In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Splitter issue

Discussion in 'The Wood Pile' started by Ctwoodtick, Jun 12, 2022.

  1. Ctwoodtick

    Ctwoodtick

    Joined:
    Jul 4, 2016
    Messages:
    841
    Likes Received:
    5,891
    Location:
    Southeast ct
    I went to start my hydraulic splitter this morning, which is a 25 ton dirty handtools model. Pull the chain to start it after doing all the normal stuff and the chain just pulls freely with no resistance in which to start the motor. I’m guessing this is some thing that happens fairly routinely, but I haven’t dealt with it yet. Any ideas on how to fix? Thanks in advance!
     
  2. Stephiedoll

    Stephiedoll

    Joined:
    Oct 8, 2013
    Messages:
    4,146
    Likes Received:
    29,798
    Location:
    Omaha, NE.
    I would guess that you will need to remove the recoil cover to see what happened. Maybe the engagement paws broke off?
     
  3. Backwoods Savage

    Backwoods Savage Moderator

    Joined:
    Oct 4, 2013
    Messages:
    49,255
    Likes Received:
    314,611
    Location:
    Central MI
    Or wore out.
     
  4. Ctwoodtick

    Ctwoodtick

    Joined:
    Jul 4, 2016
    Messages:
    841
    Likes Received:
    5,891
    Location:
    Southeast ct
    Thanks guys. I ended up pulling the string short and quick and I have good resistance again like normal. I’ll take it.
     
  5. Woodsnwoods

    Woodsnwoods

    Joined:
    Sep 21, 2015
    Messages:
    3,067
    Likes Received:
    20,081
    Location:
    Syracuse, NY
    Suggest just buying a recoil or the parts to rebuild soon as the new method may fail soon also. While you should never do this, I pulled the recoil from my lost hated lawn mower last summer when the battery died. I nascar started the 12hp with a 3/4 inch drill. Not safe, but till I got the new battery‍♂️
     
    Cash Larue and Stephiedoll like this.
  6. billb3

    billb3

    Joined:
    Oct 7, 2013
    Messages:
    10,513
    Likes Received:
    54,567
    Location:
    SE Mass
    Maybe it just has small wood chips in it.
    I'd unbolt it and inspect it.
    Worst that happens when you take it off is all the innards go flying and you now have a mechanical puzzle. The ones I've taken off didn't, but I was just replacing a pull cord.