In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

You think your wood is dry.

Discussion in 'The Wood Pile' started by Mag Craft, Nov 29, 2021.

  1. Mag Craft

    Mag Craft

    Joined:
    Dec 15, 2014
    Messages:
    4,802
    Likes Received:
    27,728
    Location:
    South East Wyoming
    So I scrounged this piece of elm back in March of 2019 and today I decided to cut it up and get it ready for splitting and stacking.
    I also wanted to check a piece for moisture content that I split by hand after cutting it up. I got 21.5 % and that was an average of checking 3 pieces. It was on a palate for about a year and then I moved it, thinking I might mill it, to the spot in the pics.

    One other point. I hate splitting elm and have been told by people on this site that if you let it dry out it splits a lot easier. Well have to say those people are correct. My hat's off to you.

    IMG_1406.JPG
    IMG_1408.JPG
     
    Last edited: Nov 29, 2021
    JDU, Ohio, mat60 and 26 others like this.
  2. Horkn

    Horkn

    Joined:
    Dec 17, 2014
    Messages:
    28,512
    Likes Received:
    161,151
    Location:
    SE Wisconsin
    Where'd you get the tiny chainsaw? :rofl: :lol:
     
    farmer steve, mat60, M2theB and 14 others like this.
  3. Mag Craft

    Mag Craft

    Joined:
    Dec 15, 2014
    Messages:
    4,802
    Likes Received:
    27,728
    Location:
    South East Wyoming
    Oh just one of those oldie but goodies.

    The reason I posted this was to show that a big round like in the pic is still not completely dry even when close to 3 years.
     
  4. buZZsaw BRAD

    buZZsaw BRAD

    Joined:
    Feb 14, 2019
    Messages:
    32,629
    Likes Received:
    199,428
    Location:
    North Haven, Connecticut
    Quite the chunk of elm there MC! How long is the bar on that saw? With a log that big you might convert the The Wood Wolverine to elm! If not, Jason would have a field day noodling it.

    Try going for five years and checking the moisture content. Maybe ready by then. :whistle:
     
  5. Mag Craft

    Mag Craft

    Joined:
    Dec 15, 2014
    Messages:
    4,802
    Likes Received:
    27,728
    Location:
    South East Wyoming
    That there was a 26" bar but I switched it out when I cut it up today to a 32" bar. I could barely get through it with one cut.
    Most of the wood I have out here that is in splits for that long is down to about 16% moisture.
     
  6. The Wood Wolverine

    The Wood Wolverine

    Joined:
    Aug 23, 2015
    Messages:
    17,935
    Likes Received:
    113,881
    Location:
    Gettysburg, PA
    buZZsaw BRAD I was thinking above would be a nice addition to my signature. :D

    Never will I ever…. :whistle:
     
  7. Eric Wanderweg

    Eric Wanderweg

    Joined:
    Apr 10, 2020
    Messages:
    7,855
    Likes Received:
    61,564
    Location:
    Bristol, Connecticut
    That’s got to be the largest piece of elm I’ve ever seen. :drool: Judging by the outside it looks like the outer layers could be dry, but it’s not surprising the internal moisture content is still over 20%. Maybe one more year after it’s cut/split/stacked should take it over the finish line.
     
  8. Rich L

    Rich L

    Joined:
    Feb 20, 2019
    Messages:
    965
    Likes Received:
    3,894
    Location:
    Eastern Mass.
    You have to keep Elm covered.That Elm is bone dry but if you don't keep it well covered it'll keep sucking up moisture.If you have any cover it with rubber roofing.Once that thing dries out it'll produce a scary amount of heat.
     
    MikeInMa, billb3, M2theB and 8 others like this.
  9. Rich L

    Rich L

    Joined:
    Feb 20, 2019
    Messages:
    965
    Likes Received:
    3,894
    Location:
    Eastern Mass.
    My neighbor down the street from me has a Elm that's so large around two men might not be able to encircle it.It is also a very beautiful tree.
     
  10. Mag Craft

    Mag Craft

    Joined:
    Dec 15, 2014
    Messages:
    4,802
    Likes Received:
    27,728
    Location:
    South East Wyoming
    On the high plains it is very dry here. I never top cover anything and I have splits that will get below 15%. It is just the climate here.
     
  11. buZZsaw BRAD

    buZZsaw BRAD

    Joined:
    Feb 14, 2019
    Messages:
    32,629
    Likes Received:
    199,428
    Location:
    North Haven, Connecticut
    I know youll never split or burn it but c'mon, the Husky herd must be itchin just a little to noodle that big sum beech!

    Yes, ideal for your sig line
     
  12. TurboDiesel

    TurboDiesel

    Joined:
    Nov 22, 2013
    Messages:
    16,196
    Likes Received:
    97,190
    Location:
    Hollidaysburg Pa
    That log would make a few table tops
     
  13. Timberdog

    Timberdog

    Joined:
    Sep 13, 2017
    Messages:
    1,450
    Likes Received:
    8,284
    Location:
    Az
    And that is precisely why seasoning does not start until wood is cut, split, and stacked.
    :saw::axe::stacker:
     
  14. The Wood Wolverine

    The Wood Wolverine

    Joined:
    Aug 23, 2015
    Messages:
    17,935
    Likes Received:
    113,881
    Location:
    Gettysburg, PA
    FIFY
     
  15. Mag Craft

    Mag Craft

    Joined:
    Dec 15, 2014
    Messages:
    4,802
    Likes Received:
    27,728
    Location:
    South East Wyoming
    +1
     
  16. Mag Craft

    Mag Craft

    Joined:
    Dec 15, 2014
    Messages:
    4,802
    Likes Received:
    27,728
    Location:
    South East Wyoming
    I keep looking but have not seen it yet.
     
  17. Mag Craft

    Mag Craft

    Joined:
    Dec 15, 2014
    Messages:
    4,802
    Likes Received:
    27,728
    Location:
    South East Wyoming
    Well being on the 3 year plan it will not get burned for another 3 years after it is stacked. But you are probably right.
     
  18. Woodchucker

    Woodchucker

    Joined:
    May 24, 2020
    Messages:
    171
    Likes Received:
    1,461
    Location:
    Iowa
    I found the other half of your tree! This was also an elm that I found last year at the neighbors lot. I think it measured around 33 inches in diameter. I cut it up with the farm boss and a 20 inch bar lol.
    20200626_101214.jpg 20200626_112305.jpg
     
  19. The Wood Wolverine

    The Wood Wolverine

    Joined:
    Aug 23, 2015
    Messages:
    17,935
    Likes Received:
    113,881
    Location:
    Gettysburg, PA
    [​IMG]

    I showed up right before that pic and let you a gift to show how I feel about elm. :rofl: :lol::rofl: :lol::rofl: :lol::rofl: :lol::rofl: :lol::rofl: :lol::rofl: :lol:
     
  20. buZZsaw BRAD

    buZZsaw BRAD

    Joined:
    Feb 14, 2019
    Messages:
    32,629
    Likes Received:
    199,428
    Location:
    North Haven, Connecticut
    That has to be your best negative elm comment ever Jason. Got a good laugh out of me.