In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Stacking firewood

Discussion in 'The Wood Pile' started by Backwoods Savage, Oct 4, 2021.

?

Do you take pride in your stacking?

  1. Yes

    83.9%
  2. No

    16.1%
  1. Backwoods Savage

    Backwoods Savage Moderator

    Joined:
    Oct 4, 2013
    Messages:
    45,560
    Likes Received:
    285,356
    Location:
    Central MI
    We constantly read about folks hating or not liking to stack wood and many say it is their least favorable part of the wood process.

    Some folks do stack but perhaps not too neatly while a few don't even bother to top cover the wood stacks. Some, a very few want to do away with stacking (the least favorable way of handling wood) and want to just throw wood in a heap.

    In many cases people have close neighbors and some even live within city limits or in a subdivision. In those cases they need to be careful to keep it nice and neat. I know of one (Redneck) who had a big problem with the city fathers and had to move his wood stacks. That, of course did not go over well.

    But what I would like to accomplish with this thread is for the guys and gals to come up with some ideas that might help others so stacking would not be a distasteful job for them. Myself, it is something I just took in stride all these 60+ years of stacking and never looked at it as a drag. I do not mind stacking at all. I do admit sometimes I am not careful enough and my stacks could be neater. I find when I hurt a lot is when I stack poorly. But in my case very few even see my wood stacks so it doesn't matter how they look...to anyone but me. I do try to take some pride in my work.

    So please, come up with some ideas or ask questions. Whatever you do, please don't turn this thread into a bashing party.



    Here are a couple pictures that got posted on another site a long time ago (not a forum) along with some other wood piles. Yes, it made me feel good to have someone compliment the wood piles.

    Wood-2009c.JPG Wood-2009e.JPG
     
    Knothead, Rich L, metalcuttr and 29 others like this.
  2. JRHAWK9

    JRHAWK9

    Joined:
    Jan 18, 2018
    Messages:
    715
    Likes Received:
    3,682
    Location:
    Wisconsin
    Curious, how do those ends hold up in 6+ years? I did that on a few rows years ago and they held up for a couple of years, but then started to shift/lean to a point where it was not very stable anymore.
     
  3. The Wood Wolverine

    The Wood Wolverine

    Joined:
    Aug 23, 2015
    Messages:
    17,272
    Likes Received:
    108,424
    Location:
    Gettysburg, PA
    More than pride in my ability (or lack of) to stack perfection, I take great pride in the completed stack and the work it took to get it there. So I fall somewhere in between.
     
  4. In the Pines

    In the Pines

    Joined:
    Sep 3, 2018
    Messages:
    1,407
    Likes Received:
    7,772
    Location:
    Ohio
    I'm always jealous when I see pics of your stacks Backwoods Savage wish I could score wood that straight to make all mine like that.
    I don't like to stack but I do like my stacks to be decent looking.
     
  5. Backwoods Savage

    Backwoods Savage Moderator

    Joined:
    Oct 4, 2013
    Messages:
    45,560
    Likes Received:
    285,356
    Location:
    Central MI
    Thank you, but I can assure you all my wood is not straight! It can pose problems and that is why I never wanted my wife to stack. She never learned how to compensate when stacking crooked and short lengths.
     
  6. tamarack

    tamarack

    Joined:
    Mar 20, 2015
    Messages:
    1,308
    Likes Received:
    6,819
    Location:
    paulina oregon
    I'm one who really don't like stacking much, but the end cribbing does help things look better.
     
  7. Backwoods Savage

    Backwoods Savage Moderator

    Joined:
    Oct 4, 2013
    Messages:
    45,560
    Likes Received:
    285,356
    Location:
    Central MI
    Those woos stacks were burned within 6 years if my memory is right and those ends never were a problem...except in one spot where a woodchuck decided he should make a home there. It did not need a home after that episode. I have some stacks now that are 5 years old and all is well, even though the woodchucks are trying. Can hardly believe how many I have this year. Caught another one just a couple days ago.
     
  8. Redneck

    Redneck

    Joined:
    Jun 25, 2015
    Messages:
    1,347
    Likes Received:
    12,537
    Location:
    Burton mi
    Not all of Backwoods Savage stacks look all that good. ( I’ve stacked a few of them)
    I’m not one to get carried away with how my stacks look. My goal is if they don’t fall over before i need to burn them then I’m happy.
     
  9. JRHAWK9

    JRHAWK9

    Joined:
    Jan 18, 2018
    Messages:
    715
    Likes Received:
    3,682
    Location:
    Wisconsin
    Guess it's from lack of talent in my case then. It was the very first time I tried cribbing.
     
  10. Backwoods Savage

    Backwoods Savage Moderator

    Joined:
    Oct 4, 2013
    Messages:
    45,560
    Likes Received:
    285,356
    Location:
    Central MI
    It gets better with practice. lol
     
  11. Chud

    Chud

    Joined:
    Aug 15, 2020
    Messages:
    6,488
    Likes Received:
    46,209
    Location:
    NC
    I take pride in my stacks, because I don’t want them to fall. Restacking is worse than stacking. It’s production time wasted. It’s more time before I get to my favorite part of picking the saws I’m going to use and cutting with them. If I have a cutting day ahead I might think about my saw choice for days. If I have stacking to do I’m not so enthusiastic and may have another cup of coffee before heading out.
    The system I use is cut for a few hours, split for a few hours, stack for a few hours. No more cutting until all the rounds are split and stacked. Split a few truckloads and stack a few truck loads. Stack em like you don’t want to touch them again until it’s time to burn or sell. Build a solid foundation of preferred length and save the stack killing shorts and uglies for the top layers. Some of my stacks are hateful and will fall no matter how careful I am. My painful lesson learned: if it’s stacked to the best of my ability and falls, reduce the height when restacking, or it will happen again.
     
  12. coreboy83

    coreboy83

    Joined:
    Feb 3, 2017
    Messages:
    706
    Likes Received:
    4,762
    Location:
    NW of Twin-Cities
    ^ this hits so close to home, it’s like I wrote it
     
  13. red oak

    red oak

    Joined:
    Aug 24, 2014
    Messages:
    752
    Likes Received:
    4,232
    I take pride in my stacking even though I have no neighbors that can see it. I don’t particularly like the job but I do enjoy looking at the stacks when they’re done. I like the way they look and that’s all that matters.
     
  14. Eric Wanderweg

    Eric Wanderweg

    Joined:
    Apr 10, 2020
    Messages:
    7,412
    Likes Received:
    57,422
    Location:
    Bristol, Connecticut
    My stacks are indicative of how much time I had when I built them. As I’m sure many can relate/remember, regular life with raising a family, taking care of things around the house and working constantly doesn’t leave huge swaths of extra time to build perfect stacks every single time. So some of my stacks I’m proud to display, while others are best to be hidden in disgrace :) As long as they don’t topple before I’m ready to burn them, I’m happy enough. With each passing year (and a lot of observation and learning from others on this forum) my piles are growing exponentially larger and generally neater/more visually appealing. I’m sure little by little I’ll continue to improve on my stacking methods (especially since reaching the 3+ year plan and not being under pressure to amass large quantities in short order)
     
  15. Erik B

    Erik B

    Joined:
    May 12, 2015
    Messages:
    5,224
    Likes Received:
    35,491
    Location:
    Western Wisconsin
    I don't take pride in my stacking but I do it well enough to keep it from falling over. It is never a thing of beauty, but it works. I do like stacking while splitting cause it gives me a break from the splitting.Split a load, stack a load, rinse and repeat.
     
  16. amateur cutter

    amateur cutter

    Joined:
    Oct 6, 2013
    Messages:
    5,902
    Likes Received:
    47,536
    Location:
    Gun Lake MI
    I'm in the stacking takes too long category. Like Chud I like the saws & equipment. My problem is OCD. I stack as neatly as I can for the simple fact that I gotta look at them & it really sucks if they fall over. Only lost one that I can remember due to an end post that rotted off. I hate doing stuff twice. The woodshed with side poles to stack against is the best thing I ever did! Saves time & looks decent. I will throw a lot of crappy pieces to the side & give them away rather than screw around trying to make them fit.
     
  17. billb3

    billb3

    Joined:
    Oct 7, 2013
    Messages:
    10,177
    Likes Received:
    52,397
    Location:
    SE Mass
    I've had some stacks I've taken pics of and would share and some that I wouldn't.

    I picked 'yes' even though a sometimes/most times choice would be more accurate.
     
  18. Backwoods Savage

    Backwoods Savage Moderator

    Joined:
    Oct 4, 2013
    Messages:
    45,560
    Likes Received:
    285,356
    Location:
    Central MI
    Why not throw them in a wheelbarrow or trailer or whatever then throw them into the boiler?
     
  19. amateur cutter

    amateur cutter

    Joined:
    Oct 6, 2013
    Messages:
    5,902
    Likes Received:
    47,536
    Location:
    Gun Lake MI
    I do that with some, but there's a couple locals that stop by & help me out here & there. They never have enough wood, money etc. Keeps them coming around when I need grunt work done.
     
  20. Biddleman

    Biddleman

    Joined:
    Aug 14, 2019
    Messages:
    2,795
    Likes Received:
    21,584
    Location:
    River Hills of Pennsylvania
    I'm in The Wood Wolverine line. It's not the stacking I take pride in, but the entire end result. I don't hate stacking as much as I use to. I think for me it's the last thing to do in the process, (besides covering) and I get anxious to get it done so I can stand back and enjoy the complete work.

    I do rotate more between bucking, splitting and stacking and not just do one for a great length of time. Though I do get in beast mode at times while I hand split and go ape s#@t on the rounds