In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

cast iron fry pan myths

Discussion in 'The Smokehouse' started by savemoney, Nov 8, 2014.

  1. fishingpol

    fishingpol

    Joined:
    Oct 3, 2013
    Messages:
    6,502
    Likes Received:
    39,620
    Location:
    Merrimack Valley, Ma.
    Very nice farmer steve! I'm not sure where mine will end up on the wall. The Mrs like the clean look behind the stove, so maybe the wall to the left under a cabinet.

    I wonder what what else Griswold cast? I saw a cast iron mailbox for sale on Marketplace once from Griswold.
     
  2. fishingpol

    fishingpol

    Joined:
    Oct 3, 2013
    Messages:
    6,502
    Likes Received:
    39,620
    Location:
    Merrimack Valley, Ma.
    The fire set has been out in the barn for over a year collecting dust and rust. I did not want to paint them.
    20201226_152002.jpg

    20201226_153125.jpg
    Cleaned and wiped veg oil on them. In the oven at 425 for 45 minutes.

    Let cool on the steps outside.

    20201226_161848.jpg

    I'm pleased with the finish. I gave them a good wipe down for any minor residue. Ready for service. I just told the Mrs. I was seasoning some cast iron...

    :D:whistle:

    20201226_162001.jpg
     
  3. Midwinter

    Midwinter

    Joined:
    Aug 8, 2017
    Messages:
    19,846
    Likes Received:
    130,461
    Location:
    Nashua, NH
  4. bogieb

    bogieb

    Joined:
    Mar 30, 2015
    Messages:
    11,438
    Likes Received:
    69,464
    Location:
    New Hampshire
    JackHammer, mat60 and Midwinter like this.
  5. fishingpol

    fishingpol

    Joined:
    Oct 3, 2013
    Messages:
    6,502
    Likes Received:
    39,620
    Location:
    Merrimack Valley, Ma.
    Krumkakes with pan cooked apple, cinnamon and allspice with yogurt side.

    20210117_082558.jpg

    20210117_082413.jpg

    20210117_082421.jpg
     
    mat60, eatonpcat, milleo and 5 others like this.
  6. TurboDiesel

    TurboDiesel

    Joined:
    Nov 22, 2013
    Messages:
    16,048
    Likes Received:
    95,627
    Location:
    Hollidaysburg Pa
  7. eatonpcat

    eatonpcat

    Joined:
    Oct 5, 2013
    Messages:
    8,431
    Likes Received:
    45,664
    Location:
    Eaton Township, OH
    X2
     
    SKEETER McCLUSKEY and mat60 like this.
  8. mat60

    mat60

    Joined:
    Oct 21, 2018
    Messages:
    2,676
    Likes Received:
    19,577
    Location:
    ME
  9. JackHammer

    JackHammer

    Joined:
    Aug 11, 2020
    Messages:
    830
    Likes Received:
    3,970
    Location:
    Ohio
    I picked up a few wagner/griswold pans off of eBay that were in pretty bad shape. 2 had deep pitting from rust over the years. I went at them with an angle grinder flap disk and then a 5 inch sanding pad. 60 grit down to 200 or so. They could still use some steel wool but they are about ready to be seasoned and put back into production.

    20210222_200523.jpg 20210222_200546.jpg 20210222_200532.jpg 20210222_200457.jpg
     
  10. fishingpol

    fishingpol

    Joined:
    Oct 3, 2013
    Messages:
    6,502
    Likes Received:
    39,620
    Location:
    Merrimack Valley, Ma.

    That top Wagner Ware is 1920- 1935. :yes:
     
  11. JackHammer

    JackHammer

    Joined:
    Aug 11, 2020
    Messages:
    830
    Likes Received:
    3,970
    Location:
    Ohio
    Sweet! Not gonna lie, that one was super cheap and the worst of the 3 with pitting. I suppose I ruined any collectable value but they were not in any useable condition so they increased in value to me.
     
  12. fishingpol

    fishingpol

    Joined:
    Oct 3, 2013
    Messages:
    6,502
    Likes Received:
    39,620
    Location:
    Merrimack Valley, Ma.
    A good portion of my collection is unmarked Wagner and BSR pans. People tend to collect pans with the name stamped in them. Lots of good unmarked pans out there. Never was a collector of rare pans or others that held value. I use most of them.

    It can be a tough call to what level of smoothness you want in a pitted pan.
     
    Last edited: Feb 23, 2021
  13. TurboDiesel

    TurboDiesel

    Joined:
    Nov 22, 2013
    Messages:
    16,048
    Likes Received:
    95,627
    Location:
    Hollidaysburg Pa
    I'm not sure I've seen a Wagner with a heat ring.:salute:
     
  14. JackHammer

    JackHammer

    Joined:
    Aug 11, 2020
    Messages:
    830
    Likes Received:
    3,970
    Location:
    Ohio
    How can you tell if an old pan is an unmarked brand?
     
  15. TurboDiesel

    TurboDiesel

    Joined:
    Nov 22, 2013
    Messages:
    16,048
    Likes Received:
    95,627
    Location:
    Hollidaysburg Pa
    There are some features to look for.

    Fire rings. It's pretty safe to say if a skillet is nice, smooth, thin and has a fire ring, it's pretty old.

    Gate marks. Same as above but it appears that it's been "welded on the bottom and ground off. " some people would think the pan was cracked and repaired. Making it worthless...but! The earliest cast was poured through a "gate" and it left a small area that needed cleaned up.
    Let me go grab a pic
    20210223_071858.jpg
     
    Last edited: Feb 23, 2021
  16. fishingpol

    fishingpol

    Joined:
    Oct 3, 2013
    Messages:
    6,502
    Likes Received:
    39,620
    Location:
    Merrimack Valley, Ma.
    Unmarked pans usually have no manufacture stamp on the bottom. Unmarked were made for stores that affixed there own paper label. Like time mentioned above, plenty of identifiers. Handle shape and how it attaches to the pan. I have some marked made in USA with no manufacturers stamp. Gate marks are late 1800's.
     
  17. WeldrDave

    WeldrDave Military Outpost Moderator

    Joined:
    Oct 8, 2013
    Messages:
    9,278
    Likes Received:
    48,415
    Location:
    The Communist Socialist Republic of New Jersey
    Make a simple Electrolysis unit vs. grinding and sanding. Easy and save's the value. :) Mine is in this thread somewhere, I've has a few that were real bad also.
     
    bogieb, NortheastAl and metalcuttr like this.
  18. woody5506

    woody5506

    Joined:
    Nov 28, 2017
    Messages:
    1,021
    Likes Received:
    5,563
    Location:
    Upstate NY
    I've gotten some super cheap wagners and they are some of my favorites. Not really sure why people price Griswolds so much higher, I suppose they are more desirable but for what reason other than their logos? Wagners cook just as good as Griswolds, and I actually prefer my late 1800s wagner over my Erie because the Erie seems to overheat pretty quick even on my stoves lowest setting. I can't deny though how cool those big block Griswold logos are, or the slant logos. But it's still just an odd market to me, 90% based on what logo is on a pan.

    It is funny how each pan is unique. Over the years I have figured out which pans I like for certain things. For whatever reason I really like my early 1900s Wapak for eggs. I think because it's slightly thicker and heavier, it takes a bit longer to heat up, so eggs don't just cook instantly in it like say the Erie that heats too quick. My 1800s Wagner #10 is my go-to for everything though.
     
  19. TurboDiesel

    TurboDiesel

    Joined:
    Nov 22, 2013
    Messages:
    16,048
    Likes Received:
    95,627
    Location:
    Hollidaysburg Pa
    Maybe not. Over time you'll likely get a nice thick seasoning that hides the sanding marks.
    Everyone seems to get crazy about the old super smooth skillets. But, honestly, i think the sand peeble surface on the newer pans works as good if not better at holding seasoning and thus making them more non-stick.

    My goto skillets are the Wagner 1891 Originals (100 year commemorative edition made in 1991). I have at least 3 and they are awesome skillets. Big, thick, heavy, with pebble surface. One Miss July found at a yard sale for $5 with the original marketing sticker still on it.
    (26+years old)
     
    bogieb, NortheastAl and metalcuttr like this.
  20. TurboDiesel

    TurboDiesel

    Joined:
    Nov 22, 2013
    Messages:
    16,048
    Likes Received:
    95,627
    Location:
    Hollidaysburg Pa
    Anything with a loop helper handle is likely a Lodge.

    BSR skillets often only had a number stamped/cast into them but they are possibly the smoothest casting you'll find.

    Anything that is marked "made in the usa" is not old. (In the mid 60's it was required that cast iron be marked because Taiwan/Asia was making cheap knockoffs.) Some with (really bad) imitation logos.
     
    bogieb, NortheastAl and metalcuttr like this.