My Drolet HT3000 thread

Yup, doesn't seem like the type to tyre easily, or need a boot to get things moving...

 

Always asking, never heeding.

 

Thanks. It comes from working flat rate for years. The job pays 3 hours wether you finish it in one hour or 5 hours. Gotta just figure it out and get it done, Or eat hotdogs.

 

I could have just done one 90. Last minute I decided to try the 2 45’ for something new. And to leave plenty of room to install the blower. I’m working with a 25 foot chimney. seems like plenty of draft. All I have right now to go on is the magnetic thermo. I’ll have to bring my ir gun home Monday.

 

?

 

First impressions?

 

X2 !

 

So far I have just run it on the lowest air setting with small loads. Seems like an inferno in the box. I’ll feel better tonight when I can take some more accurate temp measurements.

 

Looks nice!!!

 

Thanks.

 

That kinda sounds like that high draftin chimney is in play here....

 

.....

 

x2. Getting my learn on....

 

Whole lot of popcorn eating going on!

 

So I am thinking that a smaller diameter flue would increase draft?

 

After we talked about the manometer I did squat. I am kicking myself for that.

 

Did i understand you to say earlier that you replaced a 90 with two 45s?

 

I installed this stove with 2 45’s the last stove had a 90 two 90’s actually one out the back and one into the thimble.