In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Homesteading Chicken Coop Build, Chickens, Pond, Garden & Projects

Discussion in 'Hobbies and Interests' started by Well Seasoned, Mar 25, 2018.

  1. Chazsbetterhalf

    Chazsbetterhalf

    Joined:
    May 18, 2018
    Messages:
    6,010
    Likes Received:
    39,589
    Location:
    Ny
    Hey got tp. :rofl: :lol:
     
    Midwinter, Chaz and bogieb like this.
  2. Marvin

    Marvin

    Joined:
    Mar 31, 2018
    Messages:
    2,268
    Likes Received:
    15,288
    Location:
    Huntingdon, Pa
    I've spent my weekend working on a new coop with a run attached.


    Site prep and layout...
    20200703_111607.jpg

    Post holes all dug...
    20200703_173119.jpg
    Digging through shale by hand in 95* weather was not much fun. I should have weighed myself before and after. Lots of water breaks.....this step took a lot longer than planned.
    20200703_173138.jpg

    Some shale in the bottom of the holes for posts to sit on... 20200703_173145.jpg
    Day one finished. Posts all set. I forgot to mention I lost about 3 1/2 hrs of working time cause my wife cut her leg pretty bad and I had to take her to get stitches on day 1 of the build...
    20200703_210734.jpg
    Day 2 got the floor framed before having to take a break for an Independence Day picnic.
    20200704_110152.jpg
    Day 2 finished. Got back from the picnic and framed 2 walls. Also installed the Best Nest Box my FIL got for my wife as a Christmas gift a few years ago. I went a little overboard on supporting the nesting box. Its really not that heavy.
    20200704_203856.jpg

    I'm fairly pleased with the progress so far considering I'm definitely a beginner when it comes to building things.
     
    Monster80, Midwinter, bogieb and 10 others like this.
  3. Well Seasoned

    Well Seasoned Administrator

    Joined:
    Oct 3, 2013
    Messages:
    18,033
    Likes Received:
    83,739
    Location:
    N.H. WMNF
    Cool Marvin! I'm definitely looking forward to the progress!
     
    Midwinter, bogieb, Chvymn99 and 4 others like this.
  4. Chaz

    Chaz

    Joined:
    Jan 27, 2018
    Messages:
    8,656
    Likes Received:
    61,186
    Location:
    Southwestern NY
    It looks good.
    :yes:
     
    Midwinter, Marvin, bogieb and 2 others like this.
  5. DaveGunter

    DaveGunter

    Joined:
    Oct 5, 2013
    Messages:
    3,894
    Likes Received:
    22,930
    Location:
    Far Away Ranch, Meadowbrook Forest
    Looking great. Site prep and setting posts is the hardest/least fun part at least for me.

    You musta got that lumber awhile ago? PT is unobtanium around here.
     
    Midwinter, Marvin, Chaz and 3 others like this.
  6. bogieb

    bogieb

    Joined:
    Mar 30, 2015
    Messages:
    11,770
    Likes Received:
    71,333
    Location:
    New Hampshire
    Looks good. Hope your wife heals up just fine!
     
    Midwinter, Marvin, Chaz and 3 others like this.
  7. Canadian border VT

    Canadian border VT

    Joined:
    Feb 18, 2015
    Messages:
    17,248
    Likes Received:
    112,038
    Location:
    Vermont
  8. Chvymn99

    Chvymn99 Moderator

    Joined:
    Oct 4, 2013
    Messages:
    19,925
    Likes Received:
    103,393
    Location:
    KC Metro
  9. Chaz

    Chaz

    Joined:
    Jan 27, 2018
    Messages:
    8,656
    Likes Received:
    61,186
    Location:
    Southwestern NY
    X2 ^^^
     
    Chazsbetterhalf, Chvymn99 and Marvin like this.
  10. Marvin

    Marvin

    Joined:
    Mar 31, 2018
    Messages:
    2,268
    Likes Received:
    15,288
    Location:
    Huntingdon, Pa
    Thanks everyone! I made a little bit of progress yesterday afternoon. I had a few hours before dark to work at it. I got the access door wall framed and the top plates installed. I'm gonna pick up some 12 foot 2x4s today to start on the rafters this afternoon.

    DaveGunter I agree site prep sucks! I have 2 more posts to put in for the mandoor in to the run and am not looking forward to it. As far as lumber goes I have had no issue finding it around me. Crazy how different areas are affected in different ways.

    20200705_195212.jpg
     
    Knothead, Midwinter, bogieb and 6 others like this.
  11. Chvymn99

    Chvymn99 Moderator

    Joined:
    Oct 4, 2013
    Messages:
    19,925
    Likes Received:
    103,393
    Location:
    KC Metro
    hows your predation put your way? This would be the opportunity to include some kinda of anti digging threshold... Just a thought... Looking good.... Keep hydrated....
     
    Marvin, Chaz, Midwinter and 2 others like this.
  12. Chvymn99

    Chvymn99 Moderator

    Joined:
    Oct 4, 2013
    Messages:
    19,925
    Likes Received:
    103,393
    Location:
    KC Metro
    Sunday was butcher day...started at about 8 am and finished about 12:30 pm... 14 birds...8 hens average live was 8.5 to just shy of 9lbs...6 roosters averaged 9.8 to 10.62 lbs live weight...They were one day shy of 9 weeks. Everything went well until the hot weather kicked my butt.... I started cramping at the very end... yes, I drank plenty of fluids, I think I lost my electrolytes and salt... the last three birds had to go in 2 gallons freezer bags... just too big to fit in the shrink bags I had bought... supposedly they were big enough for 8-10 lb birds...

    B85B1885-83A5-49D0-8583-ABB140A40745.jpeg
    The Last 3 Amigos....
    64D6B516-A466-4B0F-BB3E-8737FAB418CA.jpeg D919C937-3428-45E3-9CE9-F244BA3C3F86.jpeg
    Me plucking... may have to look at getting a plucker off these turn out good...
    2FF2CAAE-993A-479C-905D-896596797C4B.jpeg
     
    Midwinter, DaveGunter, Marvin and 9 others like this.
  13. Well Seasoned

    Well Seasoned Administrator

    Joined:
    Oct 3, 2013
    Messages:
    18,033
    Likes Received:
    83,739
    Location:
    N.H. WMNF
    Nice job. Good to know what your eating after what you put into them.
     
  14. JWinIndiana

    JWinIndiana

    Joined:
    Aug 17, 2017
    Messages:
    1,422
    Likes Received:
    8,595
    Location:
    NorthWest Indiana
    Nothing like homegrown chicken, a couple of weeks after butchering!
     
  15. jrider

    jrider

    Joined:
    Feb 12, 2018
    Messages:
    5,247
    Likes Received:
    35,747
    Location:
    NJ
    What was their weight dressed out? I’ve never weighed them until they’ve been cleaned
     
  16. Marvin

    Marvin

    Joined:
    Mar 31, 2018
    Messages:
    2,268
    Likes Received:
    15,288
    Location:
    Huntingdon, Pa
    Chvymn99 that is the plan once I get to that step. I'm gonna dig a 2-3 inch (maybe a bit more, we'll see how the digging goes) around the coop to bury wire in.

    Quick update of the last few days progress....not a lot cause of some long work days but progress anyway.

    Run door posts are in...
    20200707_210022.jpg

    I had a helper for that job...
    20200707_182511.jpg

    I got the last wall of the coop framed...
    20200707_210035.jpg

    Then last night I finished installing top plates and put some vinyl flooring down for easier clean up....
    20200708_203253.jpg

    Next step is sheeting the coop walls and putting on the roof. That will be a bit of a challenge cause I apparently wasn't as careful as I thought I was putting posts in. The coop ended up a little wider than the door end of the run. Im hoping it won't be a problem. I'm thinking I will just have to take extra time and measure each rafter instead of making one and using it as a template. We will see...
     
  17. Chazsbetterhalf

    Chazsbetterhalf

    Joined:
    May 18, 2018
    Messages:
    6,010
    Likes Received:
    39,589
    Location:
    Ny
    That little guy is sure cute. Who is he
    Coop looking good.
     
  18. Marvin

    Marvin

    Joined:
    Mar 31, 2018
    Messages:
    2,268
    Likes Received:
    15,288
    Location:
    Huntingdon, Pa
    Thank you Chazsbetterhalf! Thats my boy Miles. He will be 2 in September.
     
  19. Chvymn99

    Chvymn99 Moderator

    Joined:
    Oct 4, 2013
    Messages:
    19,925
    Likes Received:
    103,393
    Location:
    KC Metro
    ? Didn’t have the scale to weigh that way... they say 1.5lb on average is lost from live to carcus. From what I saw on the YouTube stuff Hens were weighing like 6.5 to 7 and roosters were around 8ish...

    All I know I’m happy on the first two legs of the journey. Now if they taste good. I’ll do it again.... I’ll have to sit down to do a analysis of kinda of my numbers looks like...
     
  20. sirbuildalot

    sirbuildalot

    Joined:
    Nov 22, 2019
    Messages:
    3,314
    Likes Received:
    22,107
    Location:
    Mass
    Over the “Bug” time we got 16 chickens. Figured it would be a good way to teach the kids some responsibility and would provide good eggs to us.

    I really lucked out. My parents had chickens for several years, but recently decided to get rid of them. They were using the coop as a generator building. When we told them we were getting chickens they offered us their old coop. Me, my brother and my father were all carpenters for many years, and everything he builds is way overkill. This coop has 2x8 floor joists 16" o.c. and 2x6 16" o.c.rafters. The hardest part was moving it to my house which is about 6 miles from his house. Luckily we have good sized machinery and were able to get it done. He also gave me his old run.

    [​IMG]


    [​IMG]


    After getting the coop set up, I installed a predator apron around the perimter of where the run was going and installed the run, with a covered ramp in-between the two. I made a water and food system that will be easy for my kids to refill.


    [​IMG]


    [​IMG]


    The most recent update has been a small storage building to house the food, grit, shovel, diatomaceous earth, grit, oyster shells, pine shavings, etc. Still need to side it. I built it on a pallet so I can move it if need be. The coop and run are on the small side for the amount of chickens we have, but we free range them everyday and at least 2 of the 16 are roosters which we will probably be getting rid of.



    [​IMG]
     
    Last edited by a moderator: Jul 10, 2020