In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Clean Glass Is Nice

Discussion in 'Modern EPA Stoves and Fireplaces' started by Kimberly, Jan 14, 2020.

  1. Kimberly

    Kimberly

    Joined:
    Mar 19, 2015
    Messages:
    5,072
    Likes Received:
    12,814
    Location:
    The Kangaroo State
    I haven't cleaned the glass in awhile and it had that white glaze build-up that doesn't burn off. Also, there are a few areas of the door that get black over time; I guess the air wash flow is lacking in the corners. With these warm days, I have not been burning overnight. This morning since the stove was cold, I cleaned out the ashes and decided to also clean the glass. I do use cleaners but I double rinse afterwards with plain water to remove any chemicals left behind. I have never had an issue with using glass cleaners using my double rinse with plain water afterwards. It is nice having a clear view to the fire for a change.

    clean-glass.jpg
     
  2. sas97runner

    sas97runner

    Joined:
    Oct 12, 2019
    Messages:
    8
    Likes Received:
    35
    Location:
    Fortuna CA
    A couple damp paper towels dipped into the ash’s and wiped down with a damp paper towel is all I’ve ever used and it gets it perfectly clear. Have you tried that and the cleaner works better for you? What type of cleaner do you use?
     
  3. Kimberly

    Kimberly

    Joined:
    Mar 19, 2015
    Messages:
    5,072
    Likes Received:
    12,814
    Location:
    The Kangaroo State
    It could be the differences in the stove. I use a spray on foaming glass cleaner.
     
  4. Eric VW

    Eric VW Moderator

    Joined:
    Jan 6, 2015
    Messages:
    23,560
    Likes Received:
    133,124
    Location:
    US
    Are you removing ALL the ash, as in right down to the fire brick???
     
  5. Thor

    Thor

    Joined:
    Apr 3, 2016
    Messages:
    2,160
    Likes Received:
    16,834
    Location:
    Genoa City,Wi

    Not this dude I know's better.
     
  6. Slocum

    Slocum

    Joined:
    Mar 30, 2018
    Messages:
    1,361
    Likes Received:
    10,461
    Location:
    North Central Indiana
    This season has been so mild I’ve had a hard time keeping the stove glass clean. I use white vinegar and water mix. I haven’t tried the ash. I love the clean glass, it’s like watching a 4K HD fire.
     
  7. Barcroftb

    Barcroftb

    Joined:
    Sep 30, 2015
    Messages:
    2,877
    Likes Received:
    16,430
    Location:
    The Mitten
    YMMV but 50/50 distilled vinegar/water on a paper towel cuts right through the stuff left on the glass on my Drolet. No worries about harmful chemicals needed.

    I looked at the msds on one of the wood stove glass cleaners once (I think it was rutland) and noticed it was just a mild acid with some alcohol and dipropylene glycol. Skipping the alcohol and antifreeze and just using a mild acid (diluted vinegar) is a no brainer.
     
  8. Gpsfool

    Gpsfool

    Joined:
    Nov 13, 2015
    Messages:
    406
    Likes Received:
    2,805
    Location:
    U.S.A.
    Looks good. I need to clean mine
     
  9. Aje1967

    Aje1967

    Joined:
    Feb 4, 2018
    Messages:
    302
    Likes Received:
    1,658
    Location:
    Kenosha, Wisconsin
    Cleaning the glass is satisfying. Mine is getting dirty. :(
     
  10. Kimberly

    Kimberly

    Joined:
    Mar 19, 2015
    Messages:
    5,072
    Likes Received:
    12,814
    Location:
    The Kangaroo State
    Yes; I have always done that. I like using the clean-out plug as it is easier and less likely to dump ashes on the hearth. I use a shovel to rake the ashes into the plug hole and into the ash drawer. If there are coals I try to save them although I think I need to make a coal shifter to make the job easier. Should I be leaving a layer of ashes on the bricks?
     
  11. Eric VW

    Eric VW Moderator

    Joined:
    Jan 6, 2015
    Messages:
    23,560
    Likes Received:
    133,124
    Location:
    US
    If your stove manual doesn’t specifically say that, that’s a problem.
    Yes, typically 1” depth of ashes left in stove.
    It’s spoken of here on FHC from time to time.
    Necessity.
     
  12. Kimberly

    Kimberly

    Joined:
    Mar 19, 2015
    Messages:
    5,072
    Likes Received:
    12,814
    Location:
    The Kangaroo State
    I have read the manual a few times and don't recall anything about leaving ashes; I will pull the manual out again. Also have never seen on FHC about leaving a layer of ashes. See, you do learn something new everyday.
     
  13. Eric VW

    Eric VW Moderator

    Joined:
    Jan 6, 2015
    Messages:
    23,560
    Likes Received:
    133,124
    Location:
    US
    FIFY....
     
  14. Barcroftb

    Barcroftb

    Joined:
    Sep 30, 2015
    Messages:
    2,877
    Likes Received:
    16,430
    Location:
    The Mitten
    A heavy duty pooper scooper does a brilliant job of separating the fairy dust from the coals. I found this one on amazon: 20200102_201205.jpg
     
  15. Slocum

    Slocum

    Joined:
    Mar 30, 2018
    Messages:
    1,361
    Likes Received:
    10,461
    Location:
    North Central Indiana
    Ive always left a layer of ashes in my stove , but what is the main reason for this?
     
  16. Eric VW

    Eric VW Moderator

    Joined:
    Jan 6, 2015
    Messages:
    23,560
    Likes Received:
    133,124
    Location:
    US
    Insulation and reflection of heat.
     
  17. Horkn

    Horkn

    Joined:
    Dec 17, 2014
    Messages:
    26,985
    Likes Received:
    150,600
    Location:
    SE Wisconsin
    It's really just an extra layer of insulation. Some say that the wood burns better with an inch or so left of ashes.

    I personally see no improvement in the burning of wood when it's already dry. This is for both when I do take the ash out down to the fire bricks or leaving an inch or so of ash. The firebricks insulate and reflect.

    My quadrafire says to leave 1/8"-1/4" of ash at the bottom of the stove. Realistically, I probably leave about 1/8" of ashes left even if I intend to get all the ashes out.
     
  18. brenndatomu

    brenndatomu

    Joined:
    May 29, 2015
    Messages:
    20,438
    Likes Received:
    127,192
    Location:
    NE Ohio
    I notice a huge improvement in holding coals if an inch or two of ash is left...which is nice when the weather is warmer...not so important when its real cold and you are loading every 8-10 hours...
     
  19. Horkn

    Horkn

    Joined:
    Dec 17, 2014
    Messages:
    26,985
    Likes Received:
    150,600
    Location:
    SE Wisconsin
    Yes, holding coals is definitely better with an ash bed. That I'll agree with.
     
  20. Eric VW

    Eric VW Moderator

    Joined:
    Jan 6, 2015
    Messages:
    23,560
    Likes Received:
    133,124
    Location:
    US
    Are your bricks made of insulative refractory or are they dense refractory?