In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

I've learned a lot from all of you

Discussion in 'The Wood Pile' started by mikeward, Aug 16, 2016.

  1. brenndatomu

    brenndatomu

    Joined:
    May 29, 2015
    Messages:
    23,478
    Likes Received:
    150,987
    Location:
    NE Ohio
    Yeah, kinda funny...I was just thinking about all the crap I've accumulated since high school...moved out of my parents house with less than 2 loads in the back of a shortbed stepside pickup...now it would take at least 2 semi trailers (probably more) to move us.
    Plus another one to haul the firewood! :D
     
    Chaz, Canadian border VT and mikeward like this.
  2. mikeward

    mikeward

    Joined:
    Oct 8, 2013
    Messages:
    603
    Likes Received:
    4,042
    Location:
    Long Island, New York
    Inside the back of these sheds I have 6' chain link. I've always hung old black or green pool covers to keep rain off. The pool tarp can't blow much because of the chain link. Part of my upgrade is removing the pool cover tarp and replacing it with privacy screening made to zip tie to chain link. You usually see it on construction sites.
    I think this will let the wood breathe more and still keep rain out... we'll see.
    It lets some light thru and is pretty cheap and comes in colors. I'll load the 2pics again the first has fence privacy fabric for sale, second privacy screen up, third tarp no light thru
     

    Attached Files:

    Last edited: Jun 17, 2018
    FatBoy85 and Marvin like this.
  3. mikeward

    mikeward

    Joined:
    Oct 8, 2013
    Messages:
    603
    Likes Received:
    4,042
    Location:
    Long Island, New York
    Chaz , brenndatomu so right about collecting stuff, crap etc.
    The family joke here is I call it raw materials and most of it comes in real handy.
    The kids all joke about my raw materials and call it that when they pick up stuff
     
  4. Chaz

    Chaz

    Joined:
    Jan 27, 2018
    Messages:
    8,684
    Likes Received:
    61,458
    Location:
    Southwestern NY
    Heh.. yeah, I remember when I was in the USAF, and lived out of a duffel basically.
    All my "worldly possessions" could fit in the cab, and/or bed of a 1990 Chevy S10. :dex:

    Now.. I'd need SEVERAL S10's to move all my "stuff". I always loved George Carlin's bit on "stuff" :rofl: :lol::rofl: :lol:



    Yep, if there's a 'possible' use for it, I will save it. Much to the chagrin of my 'better half'. :whistle:
     
    FatBoy85, MikeyB, MikeInMa and 4 others like this.
  5. Chaz

    Chaz

    Joined:
    Jan 27, 2018
    Messages:
    8,684
    Likes Received:
    61,458
    Location:
    Southwestern NY
    Sorry mikeward I may have de-railed your thread a bit.. not my intention. :D
     
  6. mikeward

    mikeward

    Joined:
    Oct 8, 2013
    Messages:
    603
    Likes Received:
    4,042
    Location:
    Long Island, New York
    Love George Carlin so funny and true! :rofl: :lol:
     
  7. mikeward

    mikeward

    Joined:
    Oct 8, 2013
    Messages:
    603
    Likes Received:
    4,042
    Location:
    Long Island, New York
    I made another woodshed out of pallet racks

    I cut the diagonals out of a 12 ft high pallet rack upright

    Then I trimmed the upright down to 7 ft on one side (front) and 6 ft 6 in (rear)on the other.

    With diagonal removed I cut horizontal supports in center to split the upright down the middle. The old width was around 42" I spread the racking out to 80". To fill the gap I used some chainlink top-rail pipe which fit perfectly into the channel supports.

    Metal roofing screws to temp hold it. Stood both sides up and screwed them down onto a piece of treated 4x6. Dressed the diagonals I cut off in the beginning and welded them in place on the bottom. Also welded the chainlink pipe to horizontal channel. I need 3 11ft. beams to connect the two side sections top front and back and a second on back 2 ft above ground

    Purlins and metal roof on top. I used 12 ft roofing with one ft overhang on rear and 4 ft.on front. Will use a few 2x4s to help with snow load in front.

    This is the first of 3 sections I have to make the other 2 are still full of wood that I'll be using this year. These sections have roof coverings made of metal roofing on top of 8x8 hot tub skids. Next year they will be replaced like the first section.

    I'll end up with a 33 ft by 12 ft cover over split wood.

    I will fill this with three year old split oak. I actually unloaded full wood pallets to load the shed. This wood will not be burnt for another few years. The front row of pallets are full of cherry.
    IMG_2752.JPG IMG_2754.JPG IMG_2838.JPG IMG_0668.jpg IMG_0666.jpg
     
    Last edited: Oct 22, 2019
  8. mikeward

    mikeward

    Joined:
    Oct 8, 2013
    Messages:
    603
    Likes Received:
    4,042
    Location:
    Long Island, New York
    I still have 28 more pallets full of aged wood (at least 3 years)
    Just finished up a wood wall of stacked pallets split the last week or so
    And have a section under 3 hot tub metal roofs 8' x 24' 7 ft high from hurricane Sandy (5th pic with yellow carry all and plywood)
    Almost all of it is Oak some cherry, locust and ash
    I do have some pine I'll cut up and split for next years shoulder season

    More pics
    IMG_0635.jpg IMG_0636.jpg IMG_0637.jpg IMG_0662.jpg IMG_1126.jpg IMG_1134.jpg
     
    Last edited: Oct 22, 2019
  9. Gasifier

    Gasifier

    Joined:
    Oct 3, 2013
    Messages:
    20,435
    Likes Received:
    103,369
    Location:
    St. Lawrence River Valley, NY
  10. buZZsaw BRAD

    buZZsaw BRAD

    Joined:
    Feb 14, 2019
    Messages:
    32,659
    Likes Received:
    199,776
    Location:
    North Haven, Connecticut
    I like the little "cubicles" of wood! Nicely done! :thumbs:
     
  11. mikeward

    mikeward

    Joined:
    Oct 8, 2013
    Messages:
    603
    Likes Received:
    4,042
    Location:
    Long Island, New York
    The best thing is being able to move the cubes around with the tractors pallet forks
     
  12. buZZsaw BRAD

    buZZsaw BRAD

    Joined:
    Feb 14, 2019
    Messages:
    32,659
    Likes Received:
    199,776
    Location:
    North Haven, Connecticut
    FHC creative genius at work! Looks perfect for when you have to move the wood to the house/porch etc. Easier than a wheelbarrow! (which i use)
     
  13. mikeward

    mikeward

    Joined:
    Oct 8, 2013
    Messages:
    603
    Likes Received:
    4,042
    Location:
    Long Island, New York
    In 2008 I bought this Ford 1920 tractor and it's the best thing I ever did. Started using pallet racks the year after I got the tractor. I split load directly onto pallet and move to a temp home. We all handle wood many times but I don't mind with the tractor. I'll be 70 next year and honestly would find it hard to manage all of the firewood without the tractor and pallets.

    Funny, had a bright idea to move palleted wood directly into garage for winter after aging. Moved 2 skids in.
    As I was using wood I kept coming across mouse nests. All were nicely formed and EMPTY. Last time I did that.

    I do move it close to house. And have an emergency stash in case we get a nor'easter with feet of snow see pic below
    It's kept right behind house 20 ft from back door. I may use a few splits off top of stacks but that wood is 6-8 years old all red oak.
     

    Attached Files:

    Last edited: Oct 22, 2019
  14. GrJfer

    GrJfer

    Joined:
    Apr 29, 2014
    Messages:
    2,159
    Likes Received:
    14,075
    Location:
    The Woods of Arkansas
    Awesome!
     
  15. brenndatomu

    brenndatomu

    Joined:
    May 29, 2015
    Messages:
    23,478
    Likes Received:
    150,987
    Location:
    NE Ohio
    Just need a garage cat... :thumbs: