In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Saw Videos

Discussion in 'Chainsaws and Power Equipment' started by 94BULLITT, Feb 11, 2017.

  1. 94BULLITT

    94BULLITT

    Joined:
    Sep 20, 2014
    Messages:
    2,446
    Likes Received:
    7,181
    Location:
    Frederick County, VA
    We don't have a saw video thread that I am aware of, so lets see a video of your saw/s.
     
  2. Armbru84

    Armbru84

    Joined:
    Jan 27, 2017
    Messages:
    847
    Likes Received:
    4,513
    Location:
    Sparta, Michigan
  3. Armbru84

    Armbru84

    Joined:
    Jan 27, 2017
    Messages:
    847
    Likes Received:
    4,513
    Location:
    Sparta, Michigan
    Warm day in MI, was able to cut a little bit.
     
    chipper1, Chazsbetterhalf and Eric VW like this.
  4. 94BULLITT

    94BULLITT

    Joined:
    Sep 20, 2014
    Messages:
    2,446
    Likes Received:
    7,181
    Location:
    Frederick County, VA
    Nice saw.

    Sent from my GT-P3110 using Tapatalk
     
  5. Dakota Hoarder

    Dakota Hoarder

    Joined:
    Jan 8, 2017
    Messages:
    1,492
    Likes Received:
    8,638
    Location:
    Sioux Falls, SD
    That's.... Impressive!! Makes my 461 with 32" look like a little kid!
     
  6. jfhrtn

    jfhrtn

    Joined:
    Jan 16, 2017
    Messages:
    310
    Likes Received:
    1,393
    Location:
    Wilson, NC
    Wow beast of a saw there. Impressive how quick it got through with no bogging down

    T2 Tappin'
     
  7. awol

    awol

    Joined:
    Nov 17, 2014
    Messages:
    21
    Likes Received:
    98
    Location:
    Cabool MO.
    I can help out a little here; not my saw, but a customers. Unlimited coil, RWJcarb, good muffler mod:

     
  8. Duane(Pa)

    Duane(Pa)

    Joined:
    Mar 5, 2015
    Messages:
    299
    Likes Received:
    2,089
    Location:
    Centre Co.
  9. Armbru84

    Armbru84

    Joined:
    Jan 27, 2017
    Messages:
    847
    Likes Received:
    4,513
    Location:
    Sparta, Michigan
    Nice!
     
  10. ECsaws

    ECsaws

    Joined:
    May 23, 2014
    Messages:
    157
    Likes Received:
    768

    DD 461 play saw
     
  11. ECsaws

    ECsaws

    Joined:
    May 23, 2014
    Messages:
    157
    Likes Received:
    768

    Same saw as above with woods port
     
  12. Armbru84

    Armbru84

    Joined:
    Jan 27, 2017
    Messages:
    847
    Likes Received:
    4,513
    Location:
    Sparta, Michigan
    Looks like it pulls pretty hard.
     
  13. ECsaws

    ECsaws

    Joined:
    May 23, 2014
    Messages:
    157
    Likes Received:
    768
  14. mdavlee

    mdavlee

    Joined:
    Oct 21, 2013
    Messages:
    4,380
    Likes Received:
    10,478
    That sounds awesome. The 461 and 661 are ones I want to play with. You would think with quad transfers there's potential there like a husky
     
  15. J. Dirt

    J. Dirt

    Joined:
    Oct 1, 2015
    Messages:
    3,451
    Likes Received:
    18,066
    Location:
    Ny
    I'll have to fire up some of the toys for this thread! I've got nothing like you guys but I'm sure everyone still likes to watch and listen. Here's a little demo I did the other day for a little 445 I sold to a fellow hoarder
     
  16. Duane(Pa)

    Duane(Pa)

    Joined:
    Mar 5, 2015
    Messages:
    299
    Likes Received:
    2,089
    Location:
    Centre Co.
    I have to give a little back story on my Ecsaws 357... Wood Wolverine has been slowly converting me to Husky since the day I met him lol. I could see they were fast, but I had an awesome Stihl dealer and was quite happy with my creamsicles. After seeing and running Jason's EC 346, I knew I had to send Eric at
    ECsaws my nos 357. Jason got it all got arranged, and I have to say it is the coolest saw in my stable. You can tell it is "special" even at idle. I have less than a gallon of mix through it, and every time I take it out, it picks up a little more speed/power. I am a firm believer in heat cycle varying load break ins, and rode it like you stole it style. I have it tuned fat @13,800 and use plenty of good oil in my mix. I expect as the wood thaws out, and the saw breaks in some more, it will make some pretty interesting vids by early summer. Thanks to Jason & Eric for showing me the light!
     
  17. ECsaws

    ECsaws

    Joined:
    May 23, 2014
    Messages:
    157
    Likes Received:
    768
    I'd say it will take a exceptional 372 to to run with a good 461 ....
     
  18. mdavlee

    mdavlee

    Joined:
    Oct 21, 2013
    Messages:
    4,380
    Likes Received:
    10,478
    Cool. Maybe I need to step up the search for a 461.
     
  19. ECsaws

    ECsaws

    Joined:
    May 23, 2014
    Messages:
    157
    Likes Received:
    768
    Thanks Duane it was a pleasure working with you !! You have to becarefull with those 357's those crank stuffers will kick a porters azz if your not careful. I think you would really like a 562
     
  20. ECsaws

    ECsaws

    Joined:
    May 23, 2014
    Messages:
    157
    Likes Received:
    768
    You guys coming the 25th?