Raffle for AdirondackStihl

Scotty thank you for posting this , just had my daughter in law buy some tickets for me. I will be keeping him in my prayers.

 

$20 donated!

 

Donated to the go fund me account. I hope the surgery goes well for him.

 

$20.00 donated Hope all goes great look forward to seeing Jeremey again.

 

I was amazed at the list of prizes. Anyone who handles firewood will find most all those prizes very appropriate. Those folks went all out putting that together. Looks like a nice group of folks over on OPE. I'm all for brothers and sisters helping each other.

 

20.00. Good luck.

 

Thank you Scotty Overkill for posting this here. I am on the other Sites sometimes but spend most of my time on here as it seems more family friendly.
Best wishes to Jeremey hoping to see him @NYGTG if he is able.

 

I am going to donate. I've met Jeremy @ the Upstate NY GTG in Greenwich, he is a really nice guy. Hate to see people have to suffer financially when they have health issues. I'm a member of AS also but haven't been active on there for quite a while.

 

Pitched in $20
American's shouldn't go bankrupt due to health care issues.

 

Just now seeing this. Will donate when I get paid. Good cause. Thanks.

If we are not a member over at OPE is there anything special we need to do?

 

Donation made.

 

Hey Guys the drawing of prizes is now underway.

The third name drawn is David Byrum. No screen name and an invalid email address. Anybody recognize this name? We don't want anyone being skipped if possible.

 

Donation made....thanks for the heads up. I wasn't thinking and didn't put my screen name in the comments though so if anyone sees them draw Mark Couch let me know haha.

 

First 5 were all drawn and picked over on OPE

The next 10 are:

#6.......Nathan Lassley

#7........ @Gentleman

#8......Matt Brinkley

#9....... 166

#10....... Moparmyway

#11....... GCJenks204

#12....... Red97

#13........ @ncfarmboy

#14......... Roadfxr

#15......... Nixon

Here is the updated list of prizes (original numbers).

1) Vintage McCulloch Sharpening jig and a Homelite410 filing vise from Mastermind



3) Winner gets a set of their crankcases powdered by Glock37 from Glock37

4) Makita XPH12 18V LXT Brushless hammer drill. Will include one 4.0 Ah Battery and charger. from 166

5) Port Job from huskihl

6) New 20" Husqvarna Large Mount Bar and Square Ground chain from dustinwilt68

7) Poulan PRO 330 from @Sleeper

8) BRAND NEW Stihl 25" 84DL LIGHT bar from GCJenks204

9) Six Pack of 2.5 Gallon Red Armor Mix oil with shipping to the winner from @Dub11

10) Vintage John Deere saw from @Deets066

11) Custom Tuned Pipe from @spencerpaving.

12) Woods Port from @tree monkey

13) Brand new Husqvarna 372 Full Wrap handle from Treelife AND a set of new oem west coast spikes from Czed

14) N.O.S. Husqvarna 262 XP top end from @lwhaples



16) Chainsaw Repair Tool Set from definitive dave

17) JMS Ported 064/066 from @Miller Mod Saws and hseII

18) Timberline Sharpener from ny15

19) A case of 12 quarts of AMSOIL Saber synthetic mix from wood Chopper

20) A VERY NICE Stihl 028 Super from SOS Ridgerider

21) Brand New Performance Tools T-Handle sets in SAE, Metric, and Torx from @USMC615

22) 1 pair of work gloves, 1 pair of Oregon Braces, 1 chainsaw filing set, and 1 single person first aid kit from @ajschainsaws

23) Winner's choice of a CCC Racing 346xp NE 44.3mm pop-up performance OR race flat top piston made for us by Wiseco. Both have a 1mm chrome faced Japanese steel ring centered on the intake with patented go-fast technology and patent pending never-lose additives This offer not open to anyone who shouts "Team Stihl" at a wedding or baptism. from definitive dave



25) NEW Sugi Hara Lightweight 32" 3/8 .063 Gauge in 3003 Stihl mount (D025) from Roadfxr

26) NEW 20" Total Super Bar (TsuMura) 3/8 .050 Gauge in D009 mount from DOLMAR JUNKIE

27) Box of 044/440 parts, includes 12mm Stihl cylinder, It has a scratch that can be felt, but the saw ran great and had good power, aftermarket piston, oem piston wrist pin, oem bearing (I think) c clips, AV bushings,some rubber pieces, nice after market 440 tank, oem bearing spacer, oem handle, good running Hong Kong Zama carb, muffler base, oem badges, oem brake flag, ans a set of Glock37 powder coated spikes with hardware and chain catcher from Backtroller

28) Gamn carbide sharpener with two burrs and literature from @Tpagel

29) A dozen BEAUTIFUL hand tied Trout Flies from Adirondackstihl

30) Makita 47 Pc. Ratchet and Bit Set from 166

31) Hand forged set of draw knives, one curved and one straight, made by none other than the legendary Scotty Overkill himself! from Scotty Overkill

32) Crank tool kit from @Mattyo

33) Kit saw of the winners choice from Hl Supply from @Gentleman

34) A case (24) of Tanaka Perfect Mix 6.4oz bottles from @pizzRev

35) A brand new 18" .325 .063 74DL Bar and Chain setups in Stihl mount. Bar is the same as an Oregon Prolite (1 of 2) from 166

36) A brand new 18" .325 .063 74DL Bar and Chain setups in Stihl mount. Bar is the same as an Oregon Prolite (2 of 2) from 166

37) A Regulator (great for finding leaks) from @psuiewalsh

38) A made in USA Oregon 28" D009 mount in 3/8 .050 includes a used Stihl chain that has been converted to square ground from @psuiewalsh

39) A SWEET vintage Husqvarna labeled Windsor bar 16" 3/8 .058 60 DL from Stump Shot

40) A BEAUTIFUL Homelite410 custom Engine Turned 3/8 .050 Gauge 84 DL Stihl bar from Time's Standing Stihl

41) Oregon 5/32 sharpening kit, includes round file with guide, flat file, handles, raker gauge, bar grove cleaner, and measuring gauge (1 of 2) from 166

42) Oregon 3/16 sharpening kit includes round file with guide, flat file, handles, raker gauge, bar grove cleaner, and measuring gauge (2 of 2) from 166

43) 5 loops of Carlton A2EP-072E chain 3/8" .058 Semi Chisel from 166

44) Homelite410 filing vise from Homelite410

45) Brand New OEM Husqvarna 576 Full Wrap Handle Kit from Moparmyway

46) New in box 12" Stihl 3/8p .050 bar and 5x 12" 63pm chains, non safety (great combo for a MS 200 T) from @treesmith

47) New in box OEM Husqvarna 346xp ne piston and cylinder kit from @treesmith

48) Husqvarna chainsaw bag from @ajschainsaws

49) N.O.S. Husqvarna 262 XP three shoe clutch assembly from @NCFarmboy



51) Dolmar/Makita 030-132-000 49mm fits 6800I from @NCFarmboy

52) Jonsered 503-1687-01 fits 590 haven't measured but they look the same just diff suffix 01 vs 71 from @NCFarmboy

53) Husqvarna 503-1687-71 fits 55 CP from @NCFarmboy

54) Orange Gen III Two Idiots Logging XL T Shirt from 166

55) Black Gen III Two Idiots Logging XL T Shirt from 166

56) Freshened up and woods ported 034/036 hybrid with upgraded clutch drum and bearing as well as a metal mesh filter from Canadian farm boy



58) A pair of Sip Security pants, size is 38-35" waist with 32" length from CapitaineHaddoc

59) A nice little wood splitter axe/wall hanger with a vintage craftsman head and hickory 28” handle. My father makes them as a hobby and we wanted to donate it from @huskyboy

60) Walbro HDA 87 for a Husqvarna 262 XP from @CJ Brown

61) Brand new Oregon 18" K041 bar and two chains from @dahmer

62) N.O.S. Husqvarna 257 Cylinder kit from @NCFarmboy

63) New Husqvarna small mount bar K095 24” 3/8 .058 84 DL replaceable sprocket nose. Has a scratch here and there from storage but never used from Greg Newman

64) Winner gets a set of their crankcases powdered by Glock37 from PA Dan

65) New 28" .050 Gauge 91 DL Stihl Rollomatic ES bar in 3003 mount (D025) from jacob j.

The prizes that have been selected are:

1. 166
2. 394
3. 6100
4. 346
5. 257

 

If anyone knows Nathan Lassley please give him a nudge. He hasn't been on OPE since last fall.