In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

Ported Stihl 036 Pro

Discussion in 'Closed Ads' started by DexterDay, May 25, 2014.

Thread Status:
Not open for further replies.
  1. DexterDay

    DexterDay Administrator

    Joined:
    Oct 2, 2013
    Messages:
    12,411
    Likes Received:
    31,624
    Location:
    Northeast Oh
    I am selling the saw I said I would never sell. I love it to death, but I have no need for it with the newer saws in my stable.

    I will take compression readings tomorrow. But it's still on its 1st tank after the port job with new Caber rings. Randy (Mastermind), also installed a new (upgraded) clutch drum and larger bearing, new fuel line, impulse lune, as well as a full woods port.

    The saw on other sites would sell for $400 (on eBay, probably $450-$500 without a port job) plus the $275 port job. So that's $675 on the low end. I'd rather sell this saw to someone here.

    I'm asking $550 shipped (Priority w/Ins) with 18" Forester bar and chain. If you want the 20" Stihl ES bar, add $25.

    After a few days this will be posted elsewhere. I hate to sell it, but with a Ported 362C, it won't see any use. I would hate such a good saw to sit on the shelf.

    Regards

    Dex

    1400970215634.jpg 1400970279673.jpg 1400970326057.jpg 1400970377827.jpg 20140509_201223.jpg
     
    Hinerman likes this.
  2. StihlHead

    StihlHead

    Joined:
    Oct 3, 2013
    Messages:
    715
    Likes Received:
    1,286
    Location:
    The wild west
    Ported by whom?
     
    DexterDay likes this.
  3. Jon1270

    Jon1270

    Joined:
    Oct 4, 2013
    Messages:
    1,886
    Likes Received:
    4,543
    Location:
    Pittsburgh, PA
    And here I half thought you were kidding. I'd say your price guesstimate for eBay is conservative, but then the value of every 036 in the English-speaking world might suddenly drop by 10% if anyone figures out that it's YOU, selling your LAST ONE. People will wonder what Mr. 036 knows that they don't.

    You can see the Mastermind sticker in the pics.

    Heck of a nice saw, Dex.
     
    DexterDay and clemsonfor like this.
  4. HittinSteel

    HittinSteel

    Joined:
    Oct 7, 2013
    Messages:
    827
    Likes Received:
    2,202
    Location:
    Wooster, Ohio
    Darn nice saw Dex at a great price.
     
    DexterDay likes this.
  5. coal reaper

    coal reaper

    Joined:
    Oct 4, 2013
    Messages:
    1,138
    Likes Received:
    2,968
    Location:
    Nj
    Looks like one heck o a saw
     
    DexterDay likes this.
  6. Firewood Bandit

    Firewood Bandit

    Joined:
    Feb 10, 2014
    Messages:
    1,595
    Likes Received:
    9,349
    Location:
    Western Wisconsin, North of Lacrosse
    I am not a Stihl head, but that one is nice!
     
    DexterDay likes this.
  7. DexterDay

    DexterDay Administrator

    Joined:
    Oct 2, 2013
    Messages:
    12,411
    Likes Received:
    31,624
    Location:
    Northeast Oh
    Mastermimd..

    That's a very true statement ;)

    I love this saw on all accounts. But the 362C, makes having this saw a moot point.

    I will take more pics of the saw later and get compression reading, and also tale pics of piston and cylinder.
     
  8. Pallet Pete

    Pallet Pete Moderator

    Joined:
    Oct 2, 2013
    Messages:
    13,451
    Likes Received:
    53,866
    Location:
    Ovid
    Wow thats clean!
     
    DexterDay likes this.
  9. DexterDay

    DexterDay Administrator

    Joined:
    Oct 2, 2013
    Messages:
    12,411
    Likes Received:
    31,624
    Location:
    Northeast Oh
    It's blowing about 175 psi (still on the 1st tank with new Cabers). Here are some pics with flash and the same pics without flash.

    About as clean as they come. I got it from the original owner. He probably only cut a couple cord with it. And I've only cut a few cord with it.

    20140525_104933.jpg 20140525_104615.jpg 20140525_104531.jpg 20140525_104622.jpg 20140525_104523.jpg
     
    concretegrazer likes this.
  10. lukem

    lukem

    Joined:
    Oct 4, 2013
    Messages:
    11,142
    Likes Received:
    57,501
    Location:
    IN
    Sad.:(

    But the 362 should make up for it when it gets back from vacation.:D
     
    DexterDay likes this.
  11. MasterMech

    MasterMech The Mechanical Moderator

    Joined:
    Oct 2, 2013
    Messages:
    9,523
    Likes Received:
    25,467
    Location:
    Greenville County SC
    If there is any doubt as to the condition of this saw, now hear this.....

    I have seen and run this saw, it's as good as ANY 036 will ever be. The saw looks new and runs better than Stihl ever thought it would. $550 shipped? Holy deal batman.......
     
    mdavlee, clemsonfor and DexterDay like this.
  12. DexterDay

    DexterDay Administrator

    Joined:
    Oct 2, 2013
    Messages:
    12,411
    Likes Received:
    31,624
    Location:
    Northeast Oh
    Thanks brotha.. It's not bad.

    I just have different needs now.. ;)
     
  13. DexterDay

    DexterDay Administrator

    Joined:
    Oct 2, 2013
    Messages:
    12,411
    Likes Received:
    31,624
    Location:
    Northeast Oh
    One more day and it hits AS.
     
  14. clemsonfor

    clemsonfor

    Joined:
    Oct 3, 2013
    Messages:
    15,968
    Likes Received:
    37,265
    Location:
    Greenwood county SC
    Dang it why am I not in the market for a saw!!!! This is a steal! Thats looks brand new! Heck it is!
     
    DexterDay likes this.
  15. HDRock

    HDRock

    Joined:
    Oct 4, 2013
    Messages:
    17,160
    Likes Received:
    59,513
    Location:
    Grand Blanc, MI,
    Man! ! ! I would love so much to get that sweet saw,for that price :Dbut dang :( just bought my 55 and just can't do it. :(:(
     
    DexterDay and clemsonfor like this.
  16. JRSDWS

    JRSDWS

    Joined:
    Oct 7, 2013
    Messages:
    475
    Likes Received:
    1,337
    Location:
    Central Illinois
    If anyone here is on the fence about this one, you better jump now!!! It won't last half a day on AS!!!
     
    mdavlee likes this.
  17. clemsonfor

    clemsonfor

    Joined:
    Oct 3, 2013
    Messages:
    15,968
    Likes Received:
    37,265
    Location:
    Greenwood county SC
    Thinking the exact same JR
     
  18. DexterDay

    DexterDay Administrator

    Joined:
    Oct 2, 2013
    Messages:
    12,411
    Likes Received:
    31,624
    Location:
    Northeast Oh
    Saw is sold. Pending payment
     
    Last edited: May 26, 2014
    mdavlee, Chvymn99, HDRock and 3 others like this.
  19. JRSDWS

    JRSDWS

    Joined:
    Oct 7, 2013
    Messages:
    475
    Likes Received:
    1,337
    Location:
    Central Illinois
    Called it!!!!! Congrats Dex....even more to that lucky buyer!!!
     
    DexterDay likes this.
  20. lukem

    lukem

    Joined:
    Oct 4, 2013
    Messages:
    11,142
    Likes Received:
    57,501
    Location:
    IN
    Somebody is gonna be all kids of happy.
     
    DexterDay and HDRock like this.
Thread Status:
Not open for further replies.