For sale is a clean, low hour Mastermind ported Jonsered 2252. The sale is PHO unless you really want a matching 16" Jonsered bar, in which case we can negotiate the price. The monkey did the grinding and muff mod, this was originally Jon's. It is a cream puff, and I have only cut perhaps 5 cords at most with it. Asking $500 shipped in the US (continental.) Not seeking any trades at this time.
well if it had heated handles it would be mine already... still a GLWS... but I love those warm handles
I believe the saw in this video is the same as this ad. It was Jon's saw originally, his son in law. I don't have my stop watch, not sure who is the winner.
I'm interested in this for a second saw. I am using an old Echo 6700 that runs good, but needs some body work (I backed the pickup over it). Will this saw run a 20 inch or larger bar? Most of my cutting is in firewood logs from a tree service that are 20 to 50 inches across, some noodling involved. My other option is my local dealer that carries Dolmar and Echo. Just wondering if a hotrod 50cc will compare with the stock 67cc.
Not that I don't want to sell you this saw... but there is no replacement for displacement. 20" for me is a 72cc saw. While I'm sure this saw can do it it runs a 16". Before I suffered from mild CAD, I had a 20" exclusively on a stock 50cc saw and was happy. That size wood, I'd be looking BIG saw.
I appreciate this. I will do some looking around but am thinking that I would like a smaller lighter saw also.
50cc is my small saw. Easy on the arms but plenty of grunt to do whatever really. I've had a 30cc top handle (I just don't care for the ergonomics of a top handle), 35cc limber, and a slew of 40cc limbers. I liked the one 35cc rear handle, but severely limited past branches. 50cc is about as low as I'll go for now until I get old(er) and wimpy(er).
im VERY interested in the saw. However, i am not familiar at all with what bar and chain to put on it. I just cut firewood.. Am wanting a 16-18" saw.
I run a 16" on it, actually used it 2 days ago. It is the same as the small Husqvarna mount, and .325" sprocket. I can send you a link to an equivalent setup if you'd like. If you just want the matching bar & chain we can work out a deal as well, the bar is about as clean as the saw.