For the next week or so....maybe longer. Looks like we have a warm-up coming and they said possibly warmer than normal temps at the end of the month.
Yeppers! Supposed to be near 50 tomorrow, Back to the $99 NO's. Supposed to be a bit colder this weekend, So maybe mix in a bag or 2 of the Hamers as needed.
yep.... looks like it;s gonna be a mix/match pellet week....some of these. some of those, sprinkle in a bunch of Hamers.....
Right on ! no blowing freezing cold wind to deal with just some precip. Time to rid the stash of some more of the dreadful MWP /TSC rebagged pellets to make room for some better roasting ones ! Nice to finally run the Ghetto stove on something other than WIDE OPEN and see how it works on lower settings so far so good. Toasty in the house well 70* is major toasty for this old house and the wife is happy. Happy wife happy life.
Yessir thank you kindly worked till 10 the day it happened , noon the next day and today until 1 pm, probably should have took a few off but when you do that its a chitestorm when you return ! Tomorrow I might work the full day If I can get my Subs taken care of maybe not . Thanks Will appreciate it
Chit just had a bad accident a few doors down wtf , young girl just flipped her car on a corner and hit a house . This corner is the scene of an accident usually bad every year . Hope the Girl is ok just took her away in a bus ......
Soooo, being a pellet newb, I guess the light 1/2 dozen bags I got from TSC are bound to disappoint, eh? Of course I have no point of reference on how the machine works ( still need to install it- waiting on a 45° elbow to arrive, for the corner install), but I guess ya burn what ya got! Where do y'all shop pellets? Stove dealers? We have a Lowe's in town, TSC, but then 45 minutes to HD... and that's about it.
Not necessarily buddy depending on what stove you have , just might require more maintance as is in my case and depending on the price might be worth it. There is a post by JT I believe listing all the UPC codes and what they might be maybe check it out and report back and perhaps we can give you an idea of what to expect . Time to hit the hay myself but a great bunch of people here !!!!! Believe it or not it has a lot to do with what your roasting your pellets with , with my ghetto stove I can burn anything and I think it is the same with the elite stoves made by Harman . Good luck man I am sure you will be happy if your a previous cordwood burner . Cheers Post on TSC white bags New TSC White Bags
Not necessarily ,TSC pellets vary by region . They will ship from the closest supplier to keep costs down . Eric you will prolly get Lig's [ Lignetics ] a big pellet plant in WVA . Well thought of here
I drove past a huge Lignetics plant in Blackstone, Va back in August...knew zactly what it was...not driving 4 hours for factory direct (if there were such a thing) tho...
The TSC MWP's (white bag, blue lettering and appropriate bar code - see Luney's post for a link) run awesome for the P61a. Very little ash and better than decent heat. If I didn't have tons of firesale pellets in my yard, I would pick up a couple tons of them. However, if the TSC barcode is something like NEWPs, then be ready for lots of ash. I still got decent heat out of them so I guess it depends on how much they cost versus what else is available to you. If the code is for Curran's - ooh, I feel sorry for you Like Luneyburg said, depends on your stove and set up - works great for some, not so good for others.