I purchases these bars as a lot and totally didnt think about the husky 372 big mount and the rancher style smaller mount. All I looked at was bar length and pitch. So now I have these bars to sell. All are used but have a sprocket tip that spins smooth and no excess wear on rails but have been used as you can see. The larger three are 20" 3/8 pitch and .050 gauge and fit the ranger series of saws. I am not sure all the saws they fit but can figure it out if your not sure. The 20" bars are $20 each plus shipping. Pictures to follow. This black text bar has a bit better paint but has this wear area on the bar tip. I filed the rail so there is no burr. Its sevicable as is , but I wanted to point out what I noticed. This one has a bit more of the paint gone than the other black one but there is not the wear spot where it looked like someone cut as much with the nose. Still in good shape though. This is the blue bar. And appears to be in as good shape as the second black bar. But paint is not as faded. I can put part numbers up later if someone wants. I also have a 16" bar. I have yet to unwrap it and look it over though. I will put pictures up of it in the future.
I am looking at getting a 20" bar for my 359..small mount..I would be interested in the blue one if you still have it.
