2017 Christmas Karma thread - pay it forward

This is getting kicked off late this year I see. I just thought about it the other day, and finially got around to looking today. I see that there is not one for this year, so I will start one. We can run this thing through the new year or whenever people get out of the Christmas spirit.

Those of you who may be new or not participated in these before, they work by people who have stuff they may no longer want anymore or just want to give away, this stuff can be new or used. Usually this stuff is centered around firewood or saws, just due to this site main focus, but can be anything. People will often offer to cover shipping as well but that up to the giver and not required.

You are not required to give to claim things, and also please do not hog everything and claim everything that pops up as you sit with your phone in your hand at the ready.

I will start with a set of high current wires and foward , neutral switch for a txt series golf cart and the factory solonoid. They work fine, I just took them off when I upgraded mine and turned it into an off road cart. Shipping is on me to lower 48.

 

I’ll check my garage, plenty of stuff in there!

 

Moderating BrianK wildwest Backwoods Savage amateur cutter HDRock Gasifier papadave Eric VW yooperdave Stinny Canadian border VT SmokeyTheBear schlot

 

Thanks for the tag Grizzly Adam, I have an amazing abundance of screwdrivers.. Phillips flat etc I'll take some pics 2 5 gallon buckets..
if you need a few or a complete set let me know!

Also got a few chains from a saw that got stolen husky 16 inch wider cut I'll take some pics.

all are used but I will ensure good stuff

 

I got a bunch of these Access Points, 20 of them I believe. Take some or all. You need a controller to use them. Receipient must pay shipping.

CISCO AIRONET 802.11N Dual Band Access Point AIR-LAP10 Power Over Ethernet

 

If only I knew what those were...but I guess if I don't know I couldn't possibly need it? Who knows?

Hahaha

 

A small business owner or some techno geek coukd make use of them

 

Canadian border VT , any chance of old vintage screwdrivers? Wood handles like Pextos? I collect a few, but have room for more.

 

fishingpol I got some old from gramps 40s let me check... they are yours .. no idea brand.. some might be older I will get some pics.. I would be honored for them to go to an artist like you

 

I would be honored and provide a home for them in my shop.

 

Wow now that's a gift . To give up a family item like that. I too would be honored if I were given something like that.

No I'm not saying I want them or hate I missed it just commenting on the generosity.

 

pics taken tomorrow..

 

I have a couple of Yankee? screwdrivers I believe and a nice set of hand auger bits. I will get some pics if you are interested.
and the brace too,

 

the straight shaft screwdriver tip is broken.

 

ironpony I've tapped tree with that bit... you actually put it on your hip and turn middle to tap a maple..

 

Thank you for the offer ironpony. I have quite a few braces and bits from my Pepere, but I appreciate the gesture.

 

OK so the above screwdrivers and brace and bits are up for grabs, reply here if you are interested in them.

 

So that's a classic hand drill and bits?

Sent from my SM-G900V using Tapatalk