I have a 2' x 7' piece of EDPM if you want it PM me an address
3/8 nap roller?
I thought about those too, will they work if he wants to remove the gate?
Lowes sells rubber floor pan rubber by the foot............. or I have a piece of EDPM left over from a job I can send you, I will double check...
or killed.........
mean suckers they are, another month and this could of ended badly
Install the spring inside a pipe, maybe even sch 80 pvc, and run a cable to the gate, if something lets go the spring will be contained.........
mine NEVER clogged it could not chip fast enough to clog.....11hp
problem is the engine probably has a tapered crank, not much you can use it with.
Keep the truck, if he "digs" your style see if he comes around to CSS. if not proceed with caution next thing you know you will be wearing an...
will you need an escort vehicle to make sure you will clear over passes????
I was going to post what Shawn did but I did not want to rain on your parade. so being he brought it up first I had the same results, great idea...
you need to use a different nut for flat discs, I am surprised you did not get one with the grinder, most can use both type
more like a spurt of energy
vinyl siding a carbide blade backwards is standard.
Maybe a couple of 1x1 angles horizontal and split the expanded metal into thirds, rectangles, stop it from bowing down under weight?
Sanded some drywall I finished and got a coat of primer on it. Goofing off now, taking the wife for wings and beer tonite
Wow I just realized we are coming up on 2 years for this thread. only took me 2 weeks to meet and convince my wife we should get married she still...
I think I would enjoy a job where I could impart some of my knowledge to others but based on what I have seen lately I fear it would be a lost cause.
good idea and I wonder if you bent it a little if it would roll the staple out......
