Air box behind the damper? You talking the flapper damper on the back of the stove? I made a little hose to side in there and clean out the dust...
I did a draft test like a month ago but maybe it will be different with the new fan. It seemed a little heavier. It’s maybe 3 years old and...
I have pretty much cleaned all I can clean though. That’s what I don’t get. Cleaned all the piping, the chimney, took and put a new fan blade on...
The on,off,off is the stock position for the switches. That’s how the board comes oem from what I found. So I switched it to where I had it before...
Yup your right. I have messed with them before. I put it back to the stock one and way to many pellets and now I have it at off,off,on like I had...
Back of the board
Thank god we’re putting Mitsubishi mr. Slim ductless spits in this year. So if I get tired of the thing I don’t have to use it. Right now the...
I’m a damm iron worker I’ll take a 1 7/16 fricking spud wrench to it. Then take a lump hammer and a pry bar
I’ll shut it down and look in a little while
I didn’t look at the board number didn’t even think about it.
Yeah idk what the hell is going on. Just put a new igniter, new burn pot with 2 gaskets and new combustion blower fan. All within the last 2...
Idk wtf is up with this thing. Maybe the board is going? I’m at a loss.
I’m fricking done!!! Lit great after I cleaned it now the second time it went to start up I had to light it because pellets were falling over the edge
I did a while ago because no matter what it was pushing way to many pellets into the pot I mean the pellets were up to the second to last row of...
Then if it burns for a little while and I go in and stir the pellets up it turns into this
Cleaned everything like a always do and lit like a dream. Only thing is I noticed the right side never had a strong flame like the left
From what I saw it’s on,off,off
Just cleaned everything from the back of the stove and up the chimney. Re siliconed all joints and getting ready to start up but I want to make...
Elbow out the back of the stove, 6’ piece to another elbow then out the thimble to a 8x8 block chimney which is only like 7’ high
I do not. I usually just leave it on room temp set at 70
