I got 3 loads hauled up mostly white oak and pig nut. I split all the white oak, about 2 face cords and covered it, I wanted to do it first so it...
I haven't been working in the wood piles recently but I plan to get something done tomorrow. It was so wet around here for awhile then I got busy...
Actually that gain is only is extreme cases. Carbs are all over the place afa air flow and that is the key to getting a good one. Fuel signal can...
I set popoff the wa55 at 17# psi with a stock spring they are above 25#. I have seen 1/2 hp increase on an engine that uses the wa55 and close to...
I build rebuild kart racing engines and I'm in my peak season now. I thought I would show a couple things I do with a Walbro wa55 that is similar...
Another 100000 miles shouldn't be a problem, I have 475000 on my 03 and still not adding oil between oil changes.
My wife and I are raising 2 teenage grandsons and they aren't excited about helping but not totally unwilling either. I've found that if I work...
Snow and rain here today, supposed to be dry tomorrow and then some heavy rain 1st of the week. I have close to 2 cords of tops cut and it's so...
I have no trouble buying parts from my Stihl dealer, in fact I bought an oem Zama carb for a 170 a couple years ago and they had it in stock.
If I could only keep 1 saw i'd keep the 261. The 391 is a lot heavier but has quite a bit more power. At my age I don't want to carry a heavy saw...
I picked up a 311 parts saw about 1 1/2 years ago and then found a 391 with the plan to make 1 saw out of 2. I got them both running fairly easily...
This is a view from my shop window. It's about 300 yards to the tree line which is also the property line. I'm cutting in the valley and the tops...
I go down to about 4" sometimes smaller if I have to cut it anyway to get it out of my path.
I posted yesterday in the chainsaw section about my saws and was cutting a white oak top. I cut another one today and got a little pig nut and...
I didn't compare the 260 because I had a chance to use it a week ago and it's nothing to brag about. I used it alternately with my 250 and it...
The best description of sycamore I heard is it pizzes until it drys up then burns like paper.
I finally got to do some serious wood cutting today with the 261c vs an 026. Both have .325 chains sharpened before I headed to the woods. I...
I've been hanging on to a oem 028 super p&c for the right project, I might be interested if you sell cheap.
028 is easy to work on and aftermarket parts are reasonable. If the cylinder is junk a good used one can usually be found on ebay fairly...
Saw
