One more pic to get a better idea.[ATTACH]
For my table I welded on some square tubing like a receiver hitch. Will come off easily that way when needed. [ATTACH] [ATTACH]
Thanks a lot, I got some from just looking at the pictures!:hair:
:picard:Can't count that high.
Burn on the spot when splitting. Love the smell of smoke and I like to split when it’s cold out. A little fire sometimes feels good!
[ATTACH] Here is what mine looked like when I first made it. [ATTACH] Hated splitting vertical for the bigger ones, so I made a hoist. [ATTACH] A...
If we we're all alike, or thought alike, this world would sure be a boring place!
[ATTACH] Only speaking for myself, but will never split vertical again, will use a maul before doing that again. When I first built my splitter...
I'll give it a shot. Thanks Flamestead!
Thanks Horkn, already been there. Can't find manufacture date anywhere. I'll keep looking or maybe someone else will have an idea.
I have a GX 270 Honda engine and need to know how old it is. The model # is QA26, and the serial # is GCAJT-1025576. I'm wanting to put electric...
Never mind half of that last post, it worked when I posted reply.
1/2 NPT 15 GPM PRINCE WNV-800 NEEDLE VALVE I believe this is the one I used. How do you copy a link where you can click on it like the one in...
Those small cylinders will sure move fast as you found out! I put a needle valve in my boom cylinder circuit to slow it down. I call it a needle...
With a splitter anytime, by hand, when it's green and below freezing.
Just a little too far huh? Thank you anyways!
The pump is a concentric model 1053. I'm in Defiance Mo. That's in St. Charles county just about 50 miles west of St. Louis. I adjust system...
I'm pretty sure it's a barnes pump. Purchased pump from northern tool about 10 yrs ago. Don't have any literature on pump. I do remember it being...
How do I adjust the unloading valve on my 13 gpm log splitter? Until I get a bigger pump I would like to adjust my pump to stay in the high flow...
Gotya Thanks!
