Sounds reasonable to me as long as you put an inline fan in the ductwork which I think is what you are saying. It should help displace the warm in...
From what I understand, registers have to be > 10ft from the woodstove and have to be fusible link registers meaning there is a little "link" in...
I also think a good convective loop, in most cases, is essential to make a basement install work. However, I don't think there is a direct answer...
I just looked at the specs for the Osburn. It looks like it's about 1 cubic foot smaller than the 30NC? I don't think you could go wrong with the...
Honestly, I haven't lit a stick in it yet this year. Just been burning the zero clearance insert upstairs. I have burned some in it in the past...
Thanks for the link! I'll definitely do all four corners. How hard was it to install the rears? Can't imagine they would be too bad.
I ran the 1.5" Rough Country blocks on my 2008 for 120,000 miles without any problems. I just got a 2018 and started looking into leveling kits...
I believe the newer Silverados are a shock/coil over assembly. I'm not sure if that's any different than what was on my 2008. I really can't remember.
How did you like the Bilstein 5100s? Did you have them on the highest setting and did they impact the ride quality much? Just got a newer...
I've picked up a can of exactly what's pictured at Home Depot but an auto parts store may have it or something similar. It works but as mentioned...
Picked up a box of these at Tractor Supply on Saturday after seeing them mentioned here. Good stuff. Probably get at least 2 years out of a box too.
Very true statement. Thanks for the input. Sounds like this just may be a matter of some experimentation to find what works best. Need some cold...
Newspapers here (non-glossy with the lease amount of color possible) along with splitter scraps and branches picked from the yard during the...
I finally got some pictures. The first picture is looking at the stove from bottom of the steps. Steps are on my left. You can see the beam in...
I would keep the insulation on the workshop side for sure. Not looking to heat the shop just maybe occasionally opening the double doors...
Also, a boxed in beam runs through the center of the finished area in the basement which I think restricts the heat flow across the ceiling from...
Thanks for the replies! Currently the insert upstairs heats the house pretty well until it gets into the low teens. I have a small box fan on...
[ATTACH] Hey Guys, Long time lurker first time posting from Northeast PA Waymart area. I have an Englander 30-NC installed in my basement which...
