getting closer. these are from 2 weeks ago, didnt get any from this weekend but we finished the drywall in that small room and pretty much have...
idea is to dig a ramp down in and end up with a 3-4' deep trench under the floor, once the channel under the building is dug out fill the ramp...
not anytime in the near future. dirt floor is 8-10" below the floor joists so no way to get under the building. building is 40' wide with 2...
lots of loss from that even using insulated ducts. I understand doing it when retrofitting an old house but anything with a basement or built from...
yooperdave here is what i used for heat load calc.... HVAC Load Calculation - Maunualj - Whole House Loadcalc also did a paper calculation where i...
i found mine to only be good from about 45-55*. anything below that and it runs all day just to maintain the temp and above that it still runs...
building is sitting on an unheated crawl space with a dirt floor, I just ran the numbers thru the heat calc again and the only thing i changed was...
standard LP furnace. i splurged on a heat pump at my current shop and have found it to be useless, not wasting money on that again
14-24" of blown in fiberglass, planning on adding more to make it all 24" when we get to the garage side of the building but for now this will...
worked on the building some this weekend. sorry for the fuzzy pictures, didnt notice all the dust on my phone until just now. Will get some better...
we are going to go fancy on the cleaning side of things....ordering one of these. I figure the time it saves on sweeping every couple days will...
once the hardwood floor is refinished and some displays get set up it should drown out all the white. still kinda debating what to do for trim....
insulate ceiling, refinish floor, install furnace and ducting, build shelves and benches in the parts room. thats all that is left to do before...
and here is the rest of the building. finished up the last of the outlets and lights last night. [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
made a little progress in the last couple months. Stainless counter. Not perfect but it was a trade on some work we did in the shop for a...
for now......paint the ugly faded out blue vinyl siding white. eventually tin it......something like this. [IMG]
We have tried 3/8lp .043 on them and it does make a difference...the narrow kerf plus less aggressive chain combines to make them a bit smoother...
some pics from my visit to the new shop today. [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
good news....the new guys are rockin it....yesterday they managed to tape and mud the first coat on the whole ceiling, second coat on 2 walls, and...
adding the bit of positive news is the only way i could post that.
