It's built very similar to this saw. This saw is 101/129/80 OR 81 I can't remember for sure on the intake! This is CapitaineHaddoc saw for those...
Here's ya some pics and numbers DexterDay I took .057" from squish, gasket matched and reworked the lower trans, 100/128/81 is where I set the...
I'll get some pics. It got a dual port muffler. But my tig welding dosnt look so beautiful. On the spacer i took .057" from the squish band....
Muffler really close. Decomp not at all. And she needs either a spacer or in this saws case a big squish cut to make up for the longer stroke...
Yes sir. It has a ported 7910 top end on it. !:)
O wait Ya'll wanted a vid not a pic didn't ya! Lmao! :dex:[MEDIA]
Well I took my first stab at this 665/7910 solo hybrid build. I'm not super happy with the out come YET but she's no slouch. Needs a tad better...
Not sure. Was really not looking to make it faster just looking to gain some umph in the cut and get it to hold the rpm even better. Sorry man....
[MEDIA] After the carb mod!
395xp ugh! I'd die packing that around. Lol. OP I got a question on the maple. Is it a soft maple or hard. I ask cause here in Missouri almost...
I will have to wait till its light outside but I went in tonight and opened the venturi up to 14mm and thinned down the carb and choke rods. I...
I have. They are awesome ported!
O I got ya. Lol. No this was a dealers demo saw and I bought it off him! My bad! Sorry! Lol. I'm assuming he's demoing the 490 now. Maybe he'll be...
Well you may have to pry it away from my son. I have 2-11 year old sons and 1 of them has feel in love with this saw. Theses 500 are light and...
Are you sure it won't clean up? I can get you a brand new 7910 top in for $200.
I'm not sure. I've gotta order a new 5105 next week as I sold mine here so I can't pull it and check. But the carb is pretty plugged up on the way...
Saw #2 is headed back to the customer. The other is mine to play with for a bit. Hoping to find a tad bigger carb just to try. But these are a...
Saw #2 I took .035 off the base. 3° squish band reset to .020. Exhaust outlet the same. Intake is untouched! 108/124/86 is the numbers in this...
I thinned the carb screws on saw 1 to get more flow but still not enough. Saw will only turn a little over 13k unloaded and it's simply lack of...
Saw #1 .030 taken from the base and squish cut at a 3° angle and reset to .020. Numbers 108/123/75ish This saw is the better runner of the 2. As...
