Never heard of it. I'll have to look that up. Thanks
I'm getting ready to drill through my basement wall for my chimney. The Class A that will run through the wall is 6" Supervent. The outside...
They might let you pick it up from them. Find out where they dump it and see if that place offers it. Landscapers will have wood a lot too....
Call tree services
No overhang on the roof. Chimney will be very close to the house. I will only have a 12" horizontal run plus the 90.
Once the hole is cored through the concrete I'll be able to see how high the outside chimney will be. Right now it looks like ~12' to the roofline...
I will have 15' outside and at least 2' inside that goes to a 90. I think it'll be close to the minimum but should work.
I think I'll stick to the original plan of 12". It just seems about right to me to balance looks and convenience. I'm still young, 39, so I'm not...
Legs are still set from the factory. I think I can raise the stove about 2-3" higher with just the legs. I'm short...5'8"
I'm getting ready to finally start working on my Ideal Steel install in the basement. I have decided to build up the height of the hearth so it's...
I've never had to reload and I do long smokes on brisket. If the basket is big enough 20 hours is easy. I don't even monitor the temp much. It...
I built a couple buggies over the years, but this was my favorite. I don't even know how many years it took to build. Never used it much before...
You never have to adjust it much anyway. I've done 18 hour briskets without much adjustment at all. If I did another I'd make it as simple as...
One intake is typically your control. The other two I usually leave open and I make adjustments with the ball valve. It's extended up for no...
Love my UDS! A friend and I built two of them several years ago and they've been Rick solid. Very efficient smokers and capable of long steady...
The studded wall I go through will either be steel studs with concrete board and stone veneer, or just stone right on the concrete. I won't have...
I think your idea is genius. Reminds me of the propane grill tank concept. That machine could be adapted to so many different items. I really...
Is that double wall going through the clay or just single wall stove pipe?
I don't have any overhang on the side of the house it exits. I need to figure out how thick the wall is. I have glass block in the windows, so...
Installing the stove in the finished basement. Currently the wall is studded out and drywalled, but I plan to remove, re-do, the area behind the...
