The 2 coil leg bolts screw into the mag case.
I had a coil module that the only thing left to be wrong was the internal kill circuit had failed. Try a new AM coil for ~$10. I've used 5 of...
Wow, that's quite the hole in the oil trough. What MAY work: Scrape off all jbweld. Empty oil tank and clean all oil residue off inside and...
Looking again at pics...if tank hole lines up well with case hole...you can shove a real fuel line in (with the "grommet" at mid point) and pull...
Fuel line goes thru 2 HOLES....1st out of plastic tank = needs tight seal. 2nd thru mag crankcase hole = not tight seal. You need to drop...
I think Zenoah is the original.
Looks like a Zenoah G2500T clone. Chainsaw G2500T - Chainsaws
Ray did you just fine.
Here's one. If you paid $8, you did well. Oregon 120SXEA095 91 Series Pro-AM Sprocket-Nose Bar with A095 Mount 5400182987406 | eBay
That A095 bar is kinda rare and expensive. Too bad they didn't engineer for an A041 on 10 gazillion Poulans.
That's just a generic Chinese AM open port topend. I've used a few and they are generally acceptable. May have to dremel some slop off the ports....
Easy if the clutch side has this. Drill 1-2mm hole, then tap M10x1.0 threads - standard decomp valve threads [ATTACH]
Gotten 8 runners thus far this year. Here are 5 Poulans for $25 total. [ATTACH] [ATTACH]
Depends on how many parts are needed to make brake functional. If it needs lever, band, spring, I'd bet you could spend $50+ chasing obsolete...
You may be able to adapt a bigger dog like Husky 372. Mine are 48mm center to center holes. 450 shows 52mm. So, elongate holes 2mm. If other...
Simplest is pull plug, have proper fuel in tank, pull rope 50x, dump flooding out plug hole.
Howdy. I'm in the Huntsville area, near TN line. Middle GA is nice.
We have a big flourishing Stihl Dealer in the city. In a nearby small town, there is a Stihl Dealer inside an Ace Hardware inside a Piggly Wiggly....
As huskihl posted, Definitive Dave has good ones. but he's out of stock. Look for WT-194 clone that is fully adjustable.
metering side - lever/needle. An alum disk (~3/8" diam) that you pry out and clean out holes underneath. You gotta have a new one that fits to...
