Power Pellets at Lowes. Didn't see a price but they were sitting outside
Its all a matter of perspective. I have about a case of 9mm and a case of .45 that will probably last me a lifetime for 2 pistols I barely shoot....
Last I looked at my store, they had about 100 tons sitting in the back behind their store.
Anybody receive the $25 off / ton flyer if purchased by the end of the month? I think I read that they will hold until November with 25% down on...
I will chime in here a little. I shoot A LOT and although mostly shoot trap now competitively, I have shot my share of sporting and skeet...
Not a complete update but here is the progress. The total bar was a brand new bar and never run. I put it on my saw before this thread and the...
I think it's pretty sh*tty when your only brother in law gives you a faulty piece of equipment like 2 years ago and when you finally get around to...
I got a total bar a while back and finally put it on the husky 562 but it doesn't seem to be oiling at all. The saw oils very heavy but not in...
I did mine last summer. Me and a buddy found grindings on Craig's list for cheaper than 57 around here, about $15/ ton. We had 30 tons delivered...
[ATTACH] This is when we first carried it in and set it in place. I have to drill a hole in the shelf section for my cables, that's why my...
I boxed the heater into its space and started to nail up the inside pieces as well. [ATTACH] You can kind of see that I used some L- brackets...
...this time an entertainment center. So I started again with a laminated floor as a square starting point. [ATTACH] In my family room I also...
I don't have the base board around the piece yet (or in most of the house right now) but here it is sitting in place. I have a coat rack/ storage...
The aluminum pieces are the guides. Each side locks at 90/ 45/ 22 1/2. The saw is about 1/64th out of square in about 8' which for my business...
Some of the best colored pallets I used were from pellets that of course sat outside for who knows how long. The shop is much larger than I...
Torch. I tried a piece with stain it it just turned almost black and the stain I didn't think was all that dark In the list of Min wax. Almost...
My house is pretty open to this style. Also, I have a log cabin, so if I don't like it here after a while, I have more options instead of just...
A couple more coats on everything and here it is. [ATTACH] [ATTACH] [ATTACH] Also, before someone points it out, I know you will see the...
I then stained the top edges of the plywood and began to cut a " cap piece" for around the top edge. Also below it on the back I put solid...
Here is my first attempt at a build thread and a pallet creation so please be patient. I receive a fair amount of stuff at work on pallets so...
