I like to watch both locations plus the stove pipe 18 inches up. The front-top and the stovepipe I use to monitor the cat and the top-top to know...
My window stays dirty during shoulder season burns but when the weather gets cold it cleans itself up. I get it sparkly clean every 2-3 weeks...
Good point. I do that too.
I'm constantly trying to solve the mystery of which to shut first- the bypass or the primary air. To be honest, I haven't noticed a difference....
I bet it's been like that since December 24th.
You described what happens exactly to me when I try to push marginal wood through the IS. Even surface moisture will cause this scenario. I find...
Oh boy. You might have to use the rear flue exit if you have room to pull the stove out on the hearth. Also- does the pipe not fit around the...
Imagine sucking air through a straw with a hole in the middle. Cover the other end with your finger and compare. I would agree you had virtually...
I just took my top plate off and tried to shine a light through- seems to be sealing fine.
Are you sure you aren't thinking about the plate in the firebox? I was the badass who broke that one first. That design got fixed, brilliantly....
That long run before the 90 bend is really going to help draft.
I can't orient those pictures in my head. I tried to compare to my stove but they look much different. I have some warping on mine but it still...
All these posts and I am still REALLY confused about what it is you are calling a "snout".
I'm not sure what part you call the "snout" but it doesn't have to be air tight anyway. It should have enough of a constant vacuum that the air...
If you don't have a ceramic thimble extending into the masonry chimney you could be okay. The fiberglass rods will make the bend but they put...
The tubes won't wear out for a long time but they could get damaged if you smack them with a piece of firewood, especially when red hot- so there...
Typically a run away fire will settle down without smoking up the house if you open the door but I do like your idea and the fab work. Another...
I REALLY like the stuff from Rubicon Express when I had my YJ.
So are you trying it with the adjustable elbows?
Are are you using the adjustable elbows?
