Some are some aren’t close depends on model of saw the 7310 is pretty close to the 572 and 462 if you go by list prices. I do realize dealers can...
Heniman uses one to clean up old bars for his displays. Works well saw it in person at the museum.
Every answer you got it the original post is 100% correct and packing the bearing full did no favors to it. Grease is just a base oil in a carrier...
Was just a couple engineers that were messing around thinking what if. Could use it to light the wood fire also with the flames coming out of muffler.
Even the smaller 4-mix engines make very good torque with a brush blade. They also run a long time on a tank of fuel.
Just like the end of jonsred was redmax, husky took all the j-red saws relabeled as redmax to sell to all the lawn maintenance crews with blowers...
Power service is a good one also, I use the anti jel in winter and the regular fuel treatment in summer for my tractor. Motor oil geek found the...
I guess I miss spoke, I thought you could get new limiter pieces that were stiffer from Stihl also.
Your choice, fuel pump that could quit like any can or one of 720,000 gm 6.2 gas v-8’s that are a ticking time bomb just waiting to be replaced...
You can buy a programmer to plug in and it will turn off the cylinder deactivation but at 100,000 miles depending how often you change oil and...
You can buy all the parts from the Stihl dealer for less than this kit price. That’s all they did is source Stihl parts that were stiffer and...
Most do the eat a lifter and send metal through the block by 80-100000. If this doesn’t do it the in pan oil pump coming apart and giving it the...
But at -40 will it run more tanks with no acting up? If so I’m leaning more towards the carb and the needing a rebuild than a tank vent. High...
If it still has the exhaust screen make sure it’s not plugged then do the fuel system. If it’s became harder to start I’d look at new fuel filter...
That would be assuming a clone is equal which it isn’t, can’t say all the 400$ equivalent saws is dropping stihls value. Stihl makes a lot of...
Not sure how the clone saws affects stihls part prices and drives them up, I was just say all global parts have risen in cost for various reasons...
Nope it’s things cost them more so it gets passed on, look at echo they were cheap few years ago now they cost same as Stihl or husky.
Probably had the timing off internally, I had one other aftermarket coil I had to advance pretty far to get it to run like it should. Stihl ms 361...
That sucks it doesn’t have spark, hopefully your experience with the aftermarket 2 pc ignition works out better. I’ve tried 2 of them and both...
Nope just a really expensive injection set up, keep good fuel and filters like any new diesel. Little power service treatment to help lube the...
