Envi blocks look to be around 8000 btu per pound and a pallet of envi blocks is 2200 or so lbs. With those numbers envi blocks work out to around...
Let me fix that ad for him: just moved into a house with only a wood stove for heat. Will pay top dollar for dry, seasoned wood. Would prefer...
I'm guessing he expects this free wood to be delivered, for free, if it is a bit of a drive. Sounds like it's going to be a cold winter at his...
Could it be some sort of hickory? If you go pick it up thank the tree guy for the smart azz response by knocking on the homeowners door and...
Was it an older bar? The bearing could of just had it.
I was considering buying one but didn't in the end because of the proprietary carbides. If it used something off the shelf I probably would have.
A buddy of mine had a brand new bar lock up on a 250. It somehow managed to ingest some wood into the bearing.
You were just searching for the optimum mix ratio. 0:1 did not work out very well. Maybe try 1:1 next? :p
Unless you are overflowing with wood I say grab it. It will burn fine and keep your house warm.
Those stacks look like they might even be separated by species. Might be a prank? A post for free wood with someones number they don't like. I...
Helping neighbors in need is a great thing to do. Now lets see you post those stacks for free on craigslist :p
That is what I was trying to figure out. No sign of the chimney, not even laying on the ground. I would think if it was masonry or class A there...
I'm betting you are correct. Nobody stacks their wood that neat and gives it away.
That is the place I looked. Shipping must be less to WI. The shipping quote to get a $13 tarp to NY is $19.72
I wish the shipping was a bit cheaper. You end up paying more to ship than the cost of the tarp, which is why I haven't ordered any.
I'm tired just reading that. Getting it free and delivered is one thing, but you still have to get 20 cords into the boiler :hair:
Just make sure when using the IR temp gun you are using it on a surface that will give you accurate readings. Trying to use it on copper or brass...
The red 'mud' could be settled rust. As far as the heat exchanger, is it water to air or water to water?
Yup, looks like you have a ways to go. Mine seem to warm up real slow until the bottom of the bottom tank starts to go rise and then the pace...
I finally cleaned the wood boiler chimney last weekend after burning 5 cords last season and this was the net result. Figure it is about a pint...
