New to me Stihl 660

Picked up a Stihl 660 for $650. I think it was a pretty fair deal, she's no shelf queen, but she's a runner. Previous owner had his dealer put in new P&C. I put 2 tanks through and she runs strong!

I'm presently surprised I didn't really notice the additional weight compared to my 461. I think it just balanced better with s 28" bar.

I intended to run a 36" bar, but for now I'm just going to put on a 32" that I already have and put a shorter bar on my 461.

It does need the rubber gromet that covers the carb adjust, and a chip deflected... Any suggestions on best place to get it is appropriated

 

Nice! Most of that stuff I get off of eBay these days.

 

Also a chance I may have those parts.

 

Thanks #Armbru84 I'm going to check with my local dealer, just for convince, but they are hit or miss with older parts. I'll let you know if I'm interested!

 

They should be able to get those parts no problemo. Enjoy the power!!

 

Just pulled the muffler to check the P&C... Looks brand new! Definitely not many hours on it!

 

That's awesome. I bet a with a little clean up it will look a heck of a lot better. I got a carb grommet for my 064 on ebay from china. I'd get the chip deflector off ebay too. That stuff at the dealer will be pricey.

Carburetor Tuning Grommet For STIHL MS660 066 064 MS650 Chainsaw 1122 123 7503 | eBay

 

#94BULLITT did the carb grommet fit good?

 

Madsen's is a GREAT place to get Stihl, Pro Saw parts. They are great with the shipping and totally knowledgeable about the saws inside out.
They're in Washington and have always maintained themselves as something of a one stop shop for timber fallers.

Looks like a good saw. Congrats !!

(360) 736-1336

 

Check with definitive dave. Im sure he can set you up.

 

Yes, it fit like OEM. I'll get a picture of it in the evening

Sent from my SM-G950U using Tapatalk

 

Thanks for checking and the pic #94BULLITT , I order the carb adjuster grommet and chip deflector from my dealer, they were only 3 bucks a piece so no big deal. I Cleaned up the saw, looks much better! I'll post new pics when u get the new parts. Happy sawing FHC!!