In loving memory of Kenis D. Keathley 6/4/81 - 3/27/22 Loving father, husband, brother, friend and firewood hoarder Rest in peace, Dexterday

part #'s for bolts kit for Stihl big dawgs

Discussion in 'Chainsaws and Power Equipment' started by STEVEGODSEYJR, Nov 1, 2014.

  1. STEVEGODSEYJR

    STEVEGODSEYJR

    Joined:
    Mar 1, 2014
    Messages:
    36
    Likes Received:
    140
    Does anyone know the part numbers for the bolt kit that bolts the big dawgs to my 441. I have them, just not the bolts. It is such a pain to go to the dealer and listen to h bitch about looking up part numbers :-( Thanks
     
    STEVEGODSEYJR, Nov 1, 2014
    #1 Top
  2. nate

    nate Banned

    Joined:
    Jan 17, 2014
    Messages:
    2,027
    Likes Received:
    2,291
    Location:
    Palmer, AK
    They are just metric equivilant of 1/8" bolts, 6mm? A decent Hardware store will have them.
     
    nate, Nov 1, 2014
    #2 Top
    cgraham1 likes this.
  3. mdavlee

    mdavlee

    Joined:
    Oct 21, 2013
    Messages:
    4,380
    Likes Received:
    10,479
    M5 is the size. 16 or 20mm long and lock nuts works for the clutch cover.
     
    mdavlee, Nov 1, 2014
    #3 Top
    cgraham1 and Pyroholic like this.
  4. DexterDay

    DexterDay Administrator

    Joined:
    Oct 2, 2013
    Messages:
    12,411
    Likes Received:
    31,632
    Location:
    Northeast Oh
    There is a kit on eBay that comes with a fuel filter, spark plug, recoil dawgs, and numerous bolt sizes, nuts, E clip and washer for clutch cover, etc. It is about $20 IIRC.

    I have used quite a bit out of mine, or just replaced old with new. But this gives you an idea. This kit has what you need, plus anything you should need to replace in the near future.

    1414878236490.jpg
     
    DexterDay, Nov 1, 2014
    #4 Top
    cgraham1, Chvymn99, STEVEGODSEYJR and 1 other person like this.
  5. MasterMech

    MasterMech The Mechanical Moderator

    Joined:
    Oct 2, 2013
    Messages:
    9,648
    Likes Received:
    26,024
    Location:
    Greenville County SC
    What kind of dealer gripes about looking up parts? :BrianK: :picard:
     
    MasterMech, Nov 2, 2014
    #5 Top
    STEVEGODSEYJR likes this.
  6. prell 73

    prell 73

    Joined:
    Dec 5, 2014
    Messages:
    1,961
    Likes Received:
    3,725
    Location:
    ia
    I have them on my 290 and used machine screws an nuts
     
    prell 73, Dec 7, 2014
    #6 Top
  7. NewToStihl

    NewToStihl

    Joined:
    Apr 27, 2014
    Messages:
    807
    Likes Received:
    2,397
    Location:
    Central Indiana
    I don't think you can purchase a specific 'kit' per se, however...

    The hex head screws (2) that hold the spike to the clutch cover = 9008 319 0960
    The lock nuts (2) for the above screws = 9214 320 0700
    The top spline screw (1) that holds the spike to the case half = 9022 341 0960
    The lock nut (1) for the above screw = 9214 320 0700 (same as lock nuts for clutch cover)
    The lower spline screw (1) that holds the spike to the case half as well as the chain catch = 9022 341 1019
     
    NewToStihl, Dec 7, 2014
    #7 Top
    STEVEGODSEYJR likes this.