Swag Shoppe

Saw Videos

Discussion in 'Chainsaws and Power Equipment' started by 94BULLITT, Feb 11, 2017.

  1. 94BULLITT

    94BULLITT

    Joined:
    Sep 20, 2014
    Messages:
    1,733
    Likes Received:
    4,264
    Location:
    Frederick County, VA
    We don't have a saw video thread that I am aware of, so lets see a video of your saw/s.
     
    J. Dirt and Eric VW like this.
  2. Armbru84

    Armbru84

    Joined:
    Jan 27, 2017
    Messages:
    509
    Likes Received:
    1,931
    Location:
    Sparta, Michigan
  3. Armbru84

    Armbru84

    Joined:
    Jan 27, 2017
    Messages:
    509
    Likes Received:
    1,931
    Location:
    Sparta, Michigan
    Warm day in MI, was able to cut a little bit.
     
    Eric VW likes this.
  4. 94BULLITT

    94BULLITT

    Joined:
    Sep 20, 2014
    Messages:
    1,733
    Likes Received:
    4,264
    Location:
    Frederick County, VA
    Nice saw.

    Sent from my GT-P3110 using Tapatalk
     
    J. Dirt, Eric VW and Armbru84 like this.
  5. Dakota Hoarder

    Dakota Hoarder

    Joined:
    Jan 8, 2017
    Messages:
    203
    Likes Received:
    720
    Location:
    Sioux Falls, SD
    That's.... Impressive!! Makes my 461 with 32" look like a little kid!
     
    J. Dirt, Eric VW and Armbru84 like this.
  6. jfhrtn

    jfhrtn

    Joined:
    Jan 16, 2017
    Messages:
    266
    Likes Received:
    1,000
    Location:
    Wilson, NC
    Wow beast of a saw there. Impressive how quick it got through with no bogging down

    T2 Tappin'
     
  7. awol

    awol

    Joined:
    Nov 17, 2014
    Messages:
    21
    Likes Received:
    90
    Location:
    Cabool MO.
    I can help out a little here; not my saw, but a customers. Unlimited coil, RWJcarb, good muffler mod:

     
  8. Duane(Pa)

    Duane(Pa)

    Joined:
    Mar 5, 2015
    Messages:
    151
    Likes Received:
    1,062
    Location:
    Centre Co.
  9. Armbru84

    Armbru84

    Joined:
    Jan 27, 2017
    Messages:
    509
    Likes Received:
    1,931
    Location:
    Sparta, Michigan
    Nice!
     
    Eric VW and Duane(Pa) like this.
  10. ECsaws

    ECsaws

    Joined:
    May 23, 2014
    Messages:
    142
    Likes Received:
    670

    DD 461 play saw
     
  11. ECsaws

    ECsaws

    Joined:
    May 23, 2014
    Messages:
    142
    Likes Received:
    670

    Same saw as above with woods port
     
  12. Armbru84

    Armbru84

    Joined:
    Jan 27, 2017
    Messages:
    509
    Likes Received:
    1,931
    Location:
    Sparta, Michigan
    Looks like it pulls pretty hard.
     
  13. ECsaws

    ECsaws

    Joined:
    May 23, 2014
    Messages:
    142
    Likes Received:
    670
  14. mdavlee

    mdavlee

    Joined:
    Oct 21, 2013
    Messages:
    4,198
    Likes Received:
    9,463
    That sounds awesome. The 461 and 661 are ones I want to play with. You would think with quad transfers there's potential there like a husky
     
  15. J. Dirt

    J. Dirt

    Joined:
    Oct 1, 2015
    Messages:
    1,489
    Likes Received:
    7,203
    Location:
    Ny
    I'll have to fire up some of the toys for this thread! I've got nothing like you guys but I'm sure everyone still likes to watch and listen. Here's a little demo I did the other day for a little 445 I sold to a fellow hoarder
     
  16. Duane(Pa)

    Duane(Pa)

    Joined:
    Mar 5, 2015
    Messages:
    151
    Likes Received:
    1,062
    Location:
    Centre Co.
    I have to give a little back story on my Ecsaws 357... Wood Wolverine has been slowly converting me to Husky since the day I met him lol. I could see they were fast, but I had an awesome Stihl dealer and was quite happy with my creamsicles. After seeing and running Jason's EC 346, I knew I had to send Eric at
    ECsaws my nos 357. Jason got it all got arranged, and I have to say it is the coolest saw in my stable. You can tell it is "special" even at idle. I have less than a gallon of mix through it, and every time I take it out, it picks up a little more speed/power. I am a firm believer in heat cycle varying load break ins, and rode it like you stole it style. I have it tuned fat @13,800 and use plenty of good oil in my mix. I expect as the wood thaws out, and the saw breaks in some more, it will make some pretty interesting vids by early summer. Thanks to Jason & Eric for showing me the light!
     
  17. ECsaws

    ECsaws

    Joined:
    May 23, 2014
    Messages:
    142
    Likes Received:
    670
    I'd say it will take a exceptional 372 to to run with a good 461 ....
     
  18. mdavlee

    mdavlee

    Joined:
    Oct 21, 2013
    Messages:
    4,198
    Likes Received:
    9,463
    Cool. Maybe I need to step up the search for a 461.
     
  19. ECsaws

    ECsaws

    Joined:
    May 23, 2014
    Messages:
    142
    Likes Received:
    670
    Thanks Duane it was a pleasure working with you !! You have to becarefull with those 357's those crank stuffers will kick a porters azz if your not careful. I think you would really like a 562
     
  20. ECsaws

    ECsaws

    Joined:
    May 23, 2014
    Messages:
    142
    Likes Received:
    670
    You guys coming the 25th?