I'm going to play with this one for a while I did some extra thing to it :)
New to my fleet a 1992 044 10 mm (My third 044) [IMG] [IMG] [IMG] Completely rebuilt from them bottom up :)
Whoops 43 to 8
11 plus hours to the game starts
Just over a cord with over 3 cords still in the wood shed
Up here in the PNW we had a pretty good wind /rain storm and today I did some clean up and used the Earthquake in some 12" Alder sorry to say it...
It was bought in 91 I just put a new gasket in it every other year along with new bricks and it's as good as new It takes about a cord a month...
That was one of the MS 310 I rebuilt into a 390 Bailey motors as you can see the baffle is still in that saw is why I know it I like it I cut...
As far as I have went on MM is about 120% Most of them are about 100% [IMG] [IMG] [IMG] [IMG]
I have one [IMG] Just to say I have one :)
Both my MS 250's run circles around all the Earthquakes I had (14) and my 026's (both of them) run better than the MS 250's :) Last summer I did...
If it does there something wrong with your 026 :)
Try a different chain on those saws
Gutting these muffler is the best thing for them; then just weld them back up
shovel
I don't know sq ft but I just 780 ft of hard wood floors in kitchen; TV room and hallways last month; the house has three bedrooms; couple water...
Coffee pot on the stove and a humidifier [IMG]
FYI 2.6 ounces per gallon for 50:1 3.2 ounces per gallon for 40:1 4 ounces per gallon for 32:1 All my saws run 40:1 I do not run syn oil the...
I have 7 Stihl dealers within 40 miles of me now :)
If your worried about MM'ing your muffler pick up a extra on freebay I have a extra muffler for all my saws That motor I posted a pic of above...